Jump to content
SAU Community

Recommended Posts

I bought this to install into my V35 Bose unit (only goes to 89.9MHz)....With this unit, it will increase your reception frequency from 88MHz to 108MHz.

But now I have decided remove my whole setup and install a new system (still slowly buying bits and pieces), hence no need for this.

The unit is brand new and I can give you the receipt to show I paid $30 for it. All I want is $30 plus postage (which is about $5 to VIC). Pickup from west side of Melb is also ok. If it doesn't work, you can call the seller (who sold me this) to arrange a replacement for you, since I bought it from a store.

As you can see in the pic, it looks like a simple task. But please note, the unit needs to be attached to the +ve wire. I was intending on attaching it to the cig lighter. If you are not good with wires, get a professional to do it for u. I could do it for you as a favour today (to be repaid later) if you r in the west side of Melb...but no guarantees! LOL...

Unit is made in NZ...

FM001.jpg

FM002.jpg

FM003.jpg

PM me or call me:

0

4

0

3

3

4

7

7

3

9

Link to comment
https://www.sau.com.au/forums/topic/280700-fs-v35-fm-expander/
Share on other sites

i have no idea about the fm setup etc but somehow on mine im still able to listen to the main fm channels.

however its 10 down. say i was listening to 92.9 it would be 82.9 or 96fm it would be 86.00? has mine been installed already or is it something else?

hmm, i might get it~if thats all the part need to get it work and if u can kinda tell me where/how to get in on the car~

coz bought one from bloody jaycar for $50 and been told if need other parts..==

btw....the keyboard language looks like arab!! :P or thia~? :)

Edited by Japav

yeah...Arab....i was in Dubai for 2 years....but i ain't no Arab....:P I luv pork...

xtc - you have one installed....this is what the FM band expander does...so when you are connected to Fox FM (Melb) at 101.9, the stereo will read 91.9....

Japav, as far as I am aware, this is it - nothing else required. This is becos of the Nissan antenna plug. Generic band expanders are like $20 but have a different antenna socket, so I am assuming the Jaycar one is generic + u need to buy the adaptor to convert the antenna socket. It's not a hard job of getting it in....remove centre console, get access to the back of the head unit and plug it in. Then solder/attache the red wire to the cigarette lighter +ve.

if anyone is unsure, I suppose you could ask Chris Rogers....

yeah...Arab....i was in Dubai for 2 years....but i ain't no Arab.... :P I luv pork...

xtc - you have one installed....this is what the FM band expander does...so when you are connected to Fox FM (Melb) at 101.9, the stereo will read 91.9....

Japav, as far as I am aware, this is it - nothing else required. This is becos of the Nissan antenna plug. Generic band expanders are like $20 but have a different antenna socket, so I am assuming the Jaycar one is generic + u need to buy the adaptor to convert the antenna socket. It's not a hard job of getting it in....remove centre console, get access to the back of the head unit and plug it in. Then solder/attache the red wire to the cigarette lighter +ve.

if anyone is unsure, I suppose you could ask Chris Rogers....

hmm~guess $30 wont hurt my pocket for a trail which could save me hundreds for changing entire unit~

i'll SMS for quicker contact~

damn....just contacted my bro in taiwan...he already picked up one for me and packed into his laggage when he coming in next 2 weeks....soz

BTW, is ur silver or blue sedan shown in the other topic ? Melbourne V35s

Edited by Japav
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...