Jump to content
SAU Community

Power Fc With D1 Lm Hand Controller

Tomek
 Share

Recommended Posts

Tomek Experienced

Tomek

Posted
Posted (edited)

Item: Power fc

Age: second hand

Condition: great (hand controller colour fading)

Price: $850 delivered to your door with registered post FIRM

To Fit: GTR

Location: Townsville

Contact: pm or 0431 520 274 (Thomas)

Comments: The unit itself is in great condition, however the controller has faded in colour. Looking at the controller you can tell it wasn't from being left in the sun or bad care, the finish on these controller was not very resistant to colour fade (un-like the black) It belonged to my mechanic and has since upgraded to LINK (T51 powered 26/30 :) )

What's the Apexi D1 Limited Edition Hand Controller?

http://paulr33.skylinesaustralia.com/docs/...erfc-faq.htm#83

There was a limited build run of approx 100 units of the D1 Limited Edition D1 style hand controller. This was a gold stylish hand controller and worked just the same as the normal hand controller units. I Suspect it was a plain run of X001 hand controller to suit most models as there was only 100 made. From all that I can see its simply a gold case

Picture of Hand controller

http://www.skylinesaustralia.com/forums/post-a222086-

Model serial no.

PFC GTR33L 020 - 2306

Hand controller

FCC3 030 - 00024

$850 delivered

0431 520 274 or pm me (Thomas)

Edited by Tomek
Link to comment
https://www.sau.com.au/forums/topic/282394-power-fc-with-d1-lm-hand-controller/
Share on other sites
Tomek Experienced

Tomek

Posted
  • Author
Posted
Does the handcontroller work on any powerfc? if so ill take it if ur willing to sep

I believe it does, but un-less you can swap me a normal controller for it I won't separate it sorry.

Tomek Experienced

Tomek

Posted
  • Author
Posted
i have a r32 gtr power fc and hand controller if you willing to swap controllers

cheers

I'll ask, however don't see this happening .. much prefer a quick sale.

Tomek Experienced

Tomek

Posted
  • Author
Posted

Bump To the top

Spoke to the mechanic, buyer has the option of buying the power fc with the D1 (gold) controller or he can get a original black one..

$850 ....

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      (it is a brand new ported mellings pump) I suspect the lack of pressure is due to the leak. It was *not* that low in other logs of oil pressure in the past. It wasn't that hot either, but not far off.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Would a Mellings oil pump be a viable option  From my time with a LS, and talking to tuners and LS specialists, the "weak" OEM oil pump is one of the first things they recommend to swap out if I was going to give the engine any high RPM I opted for a Mellings high volume, with the high pressure springs and I never had a issue with it Cost wise they are not expensive in the scheme of things 
    • davemoto63
      My new to me M35 Stagea wagon

      By davemoto63 · Posted

    • davemoto63
      My new to me M35 Stagea wagon

      By davemoto63 · Posted

      Just bought a 2002 Stagea 250tRS VR-X Four AERO VQ25DET and spent the last two weekends cleaning and detailing it.. still have to do the wheels and the engine bay but the rest of it came up nice. Imported 2011 to S.A. and I'm the third owner since it was imported. I met the guy who brought it over, he went to Japan and picked out the car, bought it and ordered the wheels. He also gave me a list of stuff he did to the car with receipts. Coil overs (I have the original springs), 3" exhaust from the dump pipe back no cat, Custom dump pipe,(I have the original exhaust), Plenum spacer, 18" custom Work XSA wheels (need restoring, I've made a start..), Shift kit put through the 5 speed tiptronic auto, TV and menus/screens changed to english, Australian DTV tuner installed in rear. I've just had four new discs and new pads as well as all the fluids including the brake fluid replaced. I have all the receipts for the last 15 years and the import papers in a nice folder. Car looks great, goes like hell but fuel economy is not a thing lol.. pics next..
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      I ended up in this rut again lol, and used a shit ton of filler. One thing I can't understand is, even after using a big long block and going in long X pattern strokes, I always end up at bare metal again with no filler, and my repair started at one end of the door and now I've chased my tail to almost the other end of the door. I was thinking of hitting the panel with a hammer where it might be a high spot and making everything low then filling it, I did this on a small section on my other door by mistake and I think I fixed it lol. Is this a bad idea? The other thing is with guidecoat, whether it's the powder or spray, after I sand all the guide coat off, it doesn't reveal anything for me in terms of high spots and low spots and makes it especially hard when it's bare metal (at least in powdered form), am I doing something wrong here, or likely a high spot I keep going over and creating valleys? Lastly, stupid question but, is it possible that after sanding if I only sand over the filler area where I know to be a dent that it's impossible for me to dig into that dent? Unless there are other problems which I missed.  
×
×
  • Create New...