Jump to content
SAU Community

Recommended Posts

Got brand new Benq 22" E2200HD LCD monitor for sale.

Price: $200

Screen Size 21.5" Wide

Color Glossy Black

Resolution 1920x1080

Pixel Pitch 0.248

Brightness 300 cd/㎡

Contrast Ratio 1000:1 (DCR:10000:1 )

Response Time 5ms / 2ms(GTG)

Display Area 476.64x268.11 (mm))

Display Colours 16.7 million

Viewing Angle 170/160 (L/R;U/D) (CR>=10)

Input Signals D-sub / DVI-D/ HDM1.3 / Audio in / Headphone Jack

Horizontal Frequency (KHz) 30~83 (KHz)

Vertical Frequency (Hz) 50~76 (Hz)

Video Bandwidth (MHZ) 25 ~ 205 (MHz)

Dimensions (WxHxD) 522.8x407.8x186.8 (mm)

Weight 4.8Kg

Location: Sydney

Email: [email protected]

or call Richard 0488 341 677

Hi mate,

Why you selling the monitor again?

I'll take it for $150 since its only $185 now brand new with warranty

well if you can get it for $185 go it it there then

also tell me where too so I can get them as I bought mine for $220

Hi mate,

Why you selling the monitor again?

I'll take it for $150 since its only $185 now brand new with warranty

none of the benq distys are even selling to reseller at that price. please dont ruin this guys thread.

ps: gl with sale

Edited by trance

If you had it for sale before when I bought mine for $280 I would snap this up for the listed price. MSY had the cheapest price but none of them had it in stock in SA!

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...