Jump to content
SAU Community

Recommended Posts

Got brand new Benq 22" E2200HD LCD monitor for sale.

Price: $200

Screen Size 21.5" Wide

Color Glossy Black

Resolution 1920x1080

Pixel Pitch 0.248

Brightness 300 cd/㎡

Contrast Ratio 1000:1 (DCR:10000:1 )

Response Time 5ms / 2ms(GTG)

Display Area 476.64x268.11 (mm))

Display Colours 16.7 million

Viewing Angle 170/160 (L/R;U/D) (CR>=10)

Input Signals D-sub / DVI-D/ HDM1.3 / Audio in / Headphone Jack

Horizontal Frequency (KHz) 30~83 (KHz)

Vertical Frequency (Hz) 50~76 (Hz)

Video Bandwidth (MHZ) 25 ~ 205 (MHz)

Dimensions (WxHxD) 522.8x407.8x186.8 (mm)

Weight 4.8Kg

Location: Sydney

Email: [email protected]

or call Richard 0488 341 677

Hi mate,

Why you selling the monitor again?

I'll take it for $150 since its only $185 now brand new with warranty

well if you can get it for $185 go it it there then

also tell me where too so I can get them as I bought mine for $220

Hi mate,

Why you selling the monitor again?

I'll take it for $150 since its only $185 now brand new with warranty

none of the benq distys are even selling to reseller at that price. please dont ruin this guys thread.

ps: gl with sale

Edited by trance

If you had it for sale before when I bought mine for $280 I would snap this up for the listed price. MSY had the cheapest price but none of them had it in stock in SA!

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
×
×
  • Create New...