Jump to content
SAU Community

Recommended Posts

my mate was changin an injector and he forgot the lower seal, tryed to start engine and resulted in compression lock and a bent rod(i beleive)ticking sound from bottom end and missfire. all on cyl 4 the one he was playin with.

this resulted in me changing his engine and taking all that was left as payment.

i have:

engine complete including a few brackets, turbo rocker covers and coilpacks and cover, intake manifold, injectors, started motor, a loom that is hacked up but good for plugs ie aftermarket ecu install, r33 computer, afm, etc etc

engine had missfire that we traced to a loom issue, appart from that it was a great running motor.

offers for complete motor or parts considered

(turbo and loom not available for a week or so as they are still on the car being driven)

$850 for the lot

melb east side

cheers tim 0402 686 057

I don't understand how can the loom be hacked up because it is not available for a week as it is still on the car being driven??

Is it a series 1 or 2 engine? I need a couple loom plugs from a series 2 motor (that is if you'll split the loom from the engine package).

I don't understand how can the loom be hacked up because it is not available for a week as it is still on the car being driven??

Is it a series 1 or 2 engine? I need a couple loom plugs from a series 2 motor (that is if you'll split the loom from the engine package).

whoever did the conversion made an abortion of the loom trying to splice half rb20 and half rb25 loom, no 4 injector does not switch earth and there are a few other issues, could be sorted with some patience and knowlege. so car still runs but has missfire!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
    • Nice, that's not laggy swtching between functions at all. Could it be less laggy than the factory one below? 😋
×
×
  • Create New...