Jump to content
SAU Community

Recommended Posts

As I got douched on an avc-r and it came with just the display unit. I picked up a incrediably cheap avc-r with the solenoid and boost sensor however it was missing the harness and the plugs were snipped off as it was previously hardwired.

With the Apexi USA wiring instructions it sussed out the ecu wires, howevjava script:void(0);er i'm left without the wiring diagram for the boost sensor and solenoid wires.

Can someone take a pic of the both sides of the solenoid plug and boost sensor plug so I can mate them up and finish hardwiring the avc-r.

I'm currently wiring it now so if you can quickly get me some pics you'll have my eternal love :P

Love Seb

Link to comment
https://www.sau.com.au/forums/topic/284558-attention-apexi-avc-r-owners/
Share on other sites

I searched extensively and found what I was after, for anyone in the same predicament. Here are the wiring instructions

Pressure Sensor Pink goes to AVCR Pink

Pressure Sensor Black goes to AVCR Red

Solenoid Valve Red goes AVCR Yellow

Solenoid Valve Black goes AVCR Brown

Solenoid Valve White goes AVCR Blue

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...