Jump to content
SAU Community

Recommended Posts

Hi All,

This is the silvia i built for myself to drive daily, but rarely did. It has been stored for approx 1 1/2 yrs while i recovered from a traffic accident and now it's not really needed. So i'm looking to sell it on to someone who will enjoy it. The car has been faultless for me in the past and a comfortable cruiser on long trips. The Turbo is slightly laggy compared to standard but brings the RB20 to life, the 2 way doesn't "clunk & bang" like other brands on the market and the car isn't a handful to drive in the wet. The paint has a few chips and scrapes around the lower edges but overall is in Good Condition.

The car has 110xxx kms on it but unsure of the actually kms on the motor, it doesn't vent from the breathers or blow any smoke, idles smoothly and starts easily.

For Sale:

'88 Nissan Silvia s13 k

* Factory sunroof

* Heads up display

* R33 Front seats

* R32 RB20DET Engine Conversion

* R32 Manual Gearbox

* VG30 HI-Flowed & Steel wheeled turbo

* NPC Heavy Duty clutch

* Lightened Flywheel

* R32 Rear Cradle Conversion

* Nismo 2 way diff

* Alloy C's Type Cradle Bushes

* Hicas Lock Bar

* Adjustable Rear Traction Arms

* Adjustable Rear Camber Arms

* Urethane Sway bar "D" Bush's front & Rear

* Cusco Coilovers & Front Camber tops - Rebuilt before Fitting

* Strut Braces Front & Rear

* Alloy Steering Spacer

* Urethane GearBox Mount

* Adjustable Front SwayBar

* Gusseted Castor Brackets

* Urethane Castor Rod Bushes

* Remote Oil Filter Mount, 13 Row oil cooler mounted in the grill

* Rebuilt R32 NA Rear Callipers c-w EBC Pads

* SR Front Callipers c-w EBC Pads

* New R33 Tie Rods & Tie Rod Ends (Stronger than std)

* Urethane Link Pin Bushes Front & Rear

* Urethane Rack Mount kit

* Alloy Drift Button & Handbrake Lever Sleeve

* FMIC 600 x 300 x 76

* VL V8 3 Core Radiator fitted new

* Davies Craig 12" Thermo and Thermo Fan Controller

* Braided turbo Lines

* Braided Brake Lines Front & Rear

* Braided Clutch Line From master cyl to slave cyl

* 3" Exhaust From Turbo Back

* Cat Replacement Pipe

* 2Pac Respray in Ford Dash Green & Gloss black. Chrome & Gold Glitter in the Green, Green Glitter in the Black

* Uras style Body kit (Monkey Warehouse)

* Rear Guards flared to suit 0 offset wheels

* Timing belt, Idler bearing, Tensioner bearing replaced recently

* Mod plated in QLD for Engine, Gearbox, Turbo, Seats.

* P1 Buddy club rims , 2 new tires, 2 vgc tires

post-16019-1251410347_thumb.jpgpost-16019-1251410367_thumb.jpg

post-16019-1251410384_thumb.jpgpost-16019-1251410406_thumb.jpg

post-16019-1251410427_thumb.jpgpost-16019-1251410436_thumb.jpg

post-16019-1251410497_thumb.jpgpost-16019-1251410621_thumb.jpg

post-16019-1251410631_thumb.jpg

post-16019-1251410639_thumb.jpgpost-16019-1251410656_thumb.jpg

Alternatively, you can find the pictures HERE!

Price: 10k complete as is with no roadworthy, take 9k without wheels and $8500 without wheels & plates ( RBP19 )

Location: Western Suburbs Of Brisbane, QLD

Reply here or Contact me via PM

NOT INTERESTED IN SWAPS!

Link to comment
https://www.sau.com.au/forums/topic/285419-s13-nissan-silvia-qld/
Share on other sites

  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 3 weeks later...
  • 3 weeks later...
  • 3 weeks later...
  • 2 weeks later...
  • 9 months later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
    • hahah when youtube subscribers are faster than my updates here. Yes some vid from the day is up, here:  Note that as with all track day videos it is boring watching after the bloopers at the start.  The off was a genuine surprise to me, I've literally done a thousand laps around the place and I've never had instability there; basically it rolled into oversteer, slipped, gripped and spat me out. On the way off I mowed down one of the instructor's cones and it sat there all day looking at me with accusing cone eyes as I drove past. 1:13:20 was my fastest lap, and it was in the second session, 3rd lap.  It (or me!) got slower throughout the day as it got hotter.      
    • It sounds like you want what the Toyota Landcruisers have for their roof racks. Wanna know what you end up with? Rust holes in the roof, and water everywhere...
    • Discovered today that if I select reverse first and take my foot off the brake, then select drive, the drive indicator light works and so does the tiptronic gear indicator. 
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Does anyone here have any ideas?   Cheers guys
×
×
  • Create New...