Jump to content
SAU Community

Recommended Posts

Hi Guys,

Not going through with my upgrades to my car as I'm selling it all...

Located in Sydney West, prefer pick-up.

1. R33 Gtst RB25DET Apexi Power Fc with hand controller - $1300

Tuned to suit front mount, exhaust, fuel pump, 8-12psi. Made 200rwkw on safe tune. Item is like new, used for less then six months by previous owner.

2. HKS Cast iron manifold with external wastegate provision - $750 including HKS genuine wastegate :)

Good condition, perfect for withstanding extreme high temperature's and sudden changes in temperature (drifting). Stop repairing you're stainless mani, go cast iron :) Wastegate is reportedly 38mm, unknown spring pressure (psi). Suit Rb20det/Rb25det

3. GT3040R Garret turbo 0.86 ex housing -$800

Polished front housing with extra elbow already welded in. Previous owner made 300rwkw 22psi. Turbo still in good condition. Was running fine on previous owners car.

Please pm me for my number or email.

Cheers

Daniel

Will Sell items for a package, though it'd be to big for postage.

Individual prices together equals =$2850

As a package for all items $2500 firm

Will try to get photos soon. :)

email - [email protected]

post-35363-1253172735_thumb.jpg

post-35363-1253172787_thumb.jpg

post-35363-1253172855_thumb.jpg

post-35363-1253172922_thumb.jpg

post-35363-1253172986_thumb.jpg

post-35363-1253173040_thumb.jpg

post-35363-1253173089_thumb.jpg

post-35363-1253173140_thumb.jpg

Interested in hks manifoldwith wastegate. This has T3 flange i expect ? PM me when can . Thanks

Crap, can't pm till post count is 10 (and ive been a member for 2 1/2 years??).

Anyway, yes it is T3. my dad had the same manifold with the same turbo and it made 282rwkw on an rb20. He had the manifold flow tested and they have really good flow.

So PFC still available ?

pICS OF MANIFOLD N GATE plse. email: [email protected]

power fc still available atm...

pics of manifold and wastegate are in the above post. email sent anyway >_<

Cheers

Daniel

hey cud u plz sent me the pics for the pfc to [email protected]. thanks!!

email sent >_<

_____________________________________

Specifications of turbo also known as GT3082R

Specifications:

Horsepower: 600hp

Compressor Housing A/R -: 0.70a/r

Turbine Housing A/R -: 0.82a/r

Turbine Hsg. Attachments: Inlet: Standard 4-bolt T3 flange

Turbine Hsg. Attachments: Outlet: Standard 4-bolt T3 flange

Oil Inlet - : Inverted Flare 7/16-24 thread

Oil Drain - : Standard 2-bolt T3 flange

Bearing Type: Dual Ball Bearing

Cooling: Water Cooled Centre

Wastegate: None (Use with External Wastegate)

Garrett GT3082R Turbocharger. Previously known as GT3040R, GT30R

Will the power fc definitely work on a S2 33, ive been told the S1 is different to a S2 (im bit confuzed)

As far as I am aware they work on both. The box specifies ECR33 RB25DET, is doesn't say s1 or s2 etc or any type of year model..

Any how, it was previously on a S2 r33.

Honestly, for those that just have front mount, exhaust, fuel pump and a bleed valve with 12psi boost, you will save yourself $600 from getting a full tune. I would only recommmend a dyno run to check if the air fuel ratio is okay etc...a Dyno run cost $80.

Cheers

Daniel

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...