Jump to content
SAU Community

Recommended Posts

Hey guys, im putting my silvia up for sale. Its a 1989 K's model, CA18DET, 5 speed manual in green over grey two tone. Specs are as follows;

Engine:

CA18DET, 150,xxx KMS*

Apexi pod filter

R32 GTR front mount intercooler

Hi flowed turbo, rebuilt with 2860rs internals, only done about 2000kms and have all paper work from when it was bought

AM Performance dump pipe with screamer

AM performance 3" stainless steel exhaust with kakimoto muffler

Just had bearings and front and rear main seals done

Body:

Standard body in good condition, green over grey two tone paint. There's a few marks in the paint, and a few small dents here and there, but overall good.

Interior:

All stock interior in immaculate condition, no cracks in the dash. CD player with mb quartz speakers. Also has rare "cup holder" center console lid and "cool box" in the glove compartment

Suspenison/brakes

Non hicas model, upgraded to s14 5 stud hubs, disks and calipers, with slotted rotors and ebc greenstuff pads. Isc coilovers all round, with adjustable camber tops up front and isc camber arms in the rear. kazama castor rods and a cusco front strut brace. Recent wheel alignment done at Adelaide Radial Tire

Wheels

Work VS XX 17x8 +10 all round with 8mm spacer on the front using nismo long studs all round

Misc

new clutch plate, only a few weeks old. I also have an omori boost gauge and a z32 afm that can be negotiated with the sale.

I recently serviced the car, replacing all the major filters and fluids. There's probably a few things ive missed, but feel free to ask. The car is available for viewing weeknights and weekends so just give me a call if your interested and we can work something out. Im asking $11800 ono. I can be contacted any time on 0431 297 568. Cheers guys.

IMG_1132.jpg

IMG_1147.jpg

IMG_1129.jpg

Link to comment
https://www.sau.com.au/forums/topic/289480-s13-silvia-ks/
Share on other sites

k's= turbo

Q's= non turbo

slightly overpriced for a CA18DET s13 these days mate........... but it is very very nice maybe around $7500 without wheels and $9000 with?

Edited by slidwaz
Link to comment
https://www.sau.com.au/forums/topic/289480-s13-silvia-ks/#findComment-4847651
Share on other sites

k's= turbo

Q's= non turbo

slightly overpriced for a CA18DET s13 these days mate........... but it is very very nice maybe around $7500 without wheels and $9000 with?

his car his price. . .

Link to comment
https://www.sau.com.au/forums/topic/289480-s13-silvia-ks/#findComment-4847865
Share on other sites

thanks mate, i think the price is reasonable considering the new turbo, fresh bearings, and all of the susp. work. also forgot to mention, fairly new tires and rego till january. Also, the price is negotiable guys, i've put a deposit on a new car so i need to sell fairly soon so make me an offer.

Edited by heslo's + 1
Link to comment
https://www.sau.com.au/forums/topic/289480-s13-silvia-ks/#findComment-4848603
Share on other sites

thanks for the kind words guys, yeah it goes pretty well for what it is. Dropping the price now to 11k. Also forgot to mention that it has a full alarm/imobiliser/central locking.

Link to comment
https://www.sau.com.au/forums/topic/289480-s13-silvia-ks/#findComment-4854702
Share on other sites

wat bearings did you have done??

but yea 11 is a lil bit high, espec coz its ca, if it were sr then yea that different, if it was like 9ish i would seriously consider coz i want this colour scheme but yeh, price changes everything

Link to comment
https://www.sau.com.au/forums/topic/289480-s13-silvia-ks/#findComment-4867617
Share on other sites

the bottom end bearings and the front/rear main seals were replaced just a few weeks ago, ive got all the receipts for the work. Ive priced it at 11 "neg" as i was expecting people to come in with lower offers. Give me a call mate, if you want to come have a look at it, we could probably work out a price around what your talking about. My number is 0431297568. Cheers.

Link to comment
https://www.sau.com.au/forums/topic/289480-s13-silvia-ks/#findComment-4868543
Share on other sites

  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...