Jump to content
SAU Community

Recommended Posts

Hey guys and gals.

Im gettin my unichip hopefully installed by next week.

I am also tryin to purchase an adj cam gear.

My question is, if i got the ecu tuned without the adjustable cam gear, would the gains be different to if i got the car tuned with the adjustable cam gear ( tuned and set to -4 deg).

Does that make sense?

What are ur thoughts.

Link to comment
https://www.sau.com.au/forums/topic/29160-question-about-gettin-car-tuned/
Share on other sites

How does the Unichip for the R33 work? Do they replace the whole ECU or just the main chip inside? Either way does everything else work as before, like air conditioning etc? How much do they charge for the unit itself and programming/reprogramming?

How does the Unichip for the R33 work? Do they replace the whole ECU or just the main chip inside? Either way does everything else work as before, like air conditioning etc? How much do they charge for the unit itself and programming/reprogramming?

JimX - the Unichip on the R33's is still a piggyback computer so the stock ECu does all the normal air con and all the other stuff.

Sort of like a SAFC but it does timing as well.

J

Back onto the original question - I just tried 3 and 4 degrees on my adjustable cam gear and the car and the car ran noticably worse than 0 degrees both times.

I'm not 100% sure it's because the PowerFC wasn't coping, because it could have just been maxing out the AFM a lot easier. I did get the warning light a couple of times, but I get it at 0 degrees too so who knows.

Oh great now you tell me, I coulda saved $175 and a lot of stuffing around! :rofl: Everyone else seems to be getting good results with 3 or 4 degrees retard. If mine is going to be fine on 0 then I may as well put the original gear back and sell the Apexi one.

Well, I was maxing out my AFM and the injectors were up over 93% duty even at 0 degrees. It could just be getting to the limits a lot earlier, hence the iffy top end.

I'm pretty sure it'll be fine at -4 or so after a tune, after I replace the aforementioned items. The AFM arrives in January or February, and a tune comes soon after that.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...