Jump to content
SAU Community

Wtb: Rb25det Greddy Plenum, Power Fc, Plus More


Recommended Posts

Hey im after a few things for my project, For RB25DET S2

Id prefur everything New but may accept Used If in good condition.

- Greddy Plenum

- Apexi Power Fc

- Hi Mount Manifold (open to different options but after some quality)

- Standard Injectors + Rail

- Standard Full Loom UNMODIFIED

- Standard Cams

All Needs To Be in working order and in good condition.

Will need Photos and you name your price.

Can Contact Me on Here Via PM or Just Reply to thread.

Im In VIC MILDURA 3500

- Apexi Power FC + Controller (Found)

- Z32 AFM + Plug (Found)

- Greddy Plenum

- Hi Mount Manifold (open to different options but after some quality)

- Standard Injectors + Rail

- Standard Full Loom UNMODIFIED

- Standard Cams

Edited by RB30TI

- Apexi Power FC + Controller (Found)

- Z32 AFM + Plug (Found)

- Greddy Plenum (Found)

- Hi Mount Manifold (open to different options but after some quality)

- Standard Injectors + Rail (Not Needed)

- Standard Full Loom UNMODIFIED

- Standard Cams (Pending)

Cheers for the PM probably a lil to pricey for me sorry.

- Apexi Power FC + Controller (Found)

- Z32 AFM + Plug (Found)

- Greddy Plenum (Found)

- Hi Mount Manifold (open to different options but after some quality) (Found)

- Standard Injectors + Rail (Not Needed)

- Standard Full Loom UNMODIFIED

- Standard Cams (Pending)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...