Jump to content
SAU Community

Recommended Posts

Up for sale is the x02 Ture Dual catback Exhaust that i bought off ebay less than a month ago.

this is the copy of the HKS hi power exhaust

bought it for $775

here's the link that i got it from

http://cgi.ebay.com.au/03-07-Nissan-350Z-G...=item27a9893e1d

If you curious about the sound, just simply go youtube and search x02 exhaust and you will be able to see alot,

selling it coz it's too loud for my taste, i like quieter exhaust, if anyone wanna do swap ill b interested too, but quiet exhaust only!

lol... :)

thx

Link to comment
https://www.sau.com.au/forums/topic/295106-fs-v35350z-exhaust/
Share on other sites

I told you it was loud! But it suits my taste :)

You get used to it.

haha...yea it is loud! i didn't expect that loud. lol.

it's too loud for me! my gf keep annoying me 2 change it. so yea lol

but actually i like the sound(if abit quieter), it sounded so deep and without any drone,

i can feel the power gain, or mayb it's the sound that made me feel it's running faster! lol

Edited by FoxV35
MaXiMuS007 have you got one of these exhausts??

Yeah I have one of these and it is super loud under throttle or under load, but it's not bad when you are cruising. I got used to it after a week or so. It sounds really mean but it's not for everyone.

You can have a listen here to the sound here:

.
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...