Jump to content
SAU Community

Recommended Posts

Do not miss this great deal!!!!! Fully Built (0 mileage after build) RB26DETT race engine for sale. It can easily handle over 1,000HP, has the following and more:

  • Polished / Ported Head
  • 1000cc injectors
  • new valves
  • tomei valve springs
  • HKS 272 camshaft in/ex
  • ARP main bearing studs
  • ARP head studs
  • Polished Block
  • Tomei Cam pulleys
  • Aeromotive Fuel Regulator
  • HKS Fuel rail
  • HKS Pulley Damper
  • Tomei Full Race Gasket Set
  • ACL Race Bearings
  • Tomei Connector Rods
  • CP Pistons
  • 1,000cc Injectors
  • Aeromotive Fuel Regulator
  • Race intake Plenum
  • Big Single Throttle Body
  • Jun Oil Pump
  • Greddy Oil Sump
  • Greddy T88

Turbo with headers and HKS wastegate

Also many more items not mentioned above, It is fully built and the parts alone were purchased for more than BHD5,000 (excluding main engine and labor charge). Willing to sell completely built engine (including Turbo Kit) for AUD 13,000 (neg.).

Please contact Ali

00973 39330337 or email on [email protected]

hey mate,

just a couple of questions for your sake,

where are you located?

will you post?

how much for postage to different area's?

can you put some pics up, it will help lots?

what sort of saftey is there for the buyer, as you are new, not implying that you are dodgy or anything, but security is nice...

apart from that, your price is very good for all that gear, and you should have no issues selling it. all the best

cheers

hey mate,

just a couple of questions for your sake,

where are you located?

will you post?

how much for postage to different area's?

can you put some pics up, it will help lots?

what sort of saftey is there for the buyer, as you are new, not implying that you are dodgy or anything, but security is nice...

apart from that, your price is very good for all that gear, and you should have no issues selling it. all the best

cheers

Thanks Sebastion.... I'm located in Bahrain, I'm not sure how much postage would cost, so I don't know if i can pay all myself or shre the postage fee with the buyer (I'll research it and update). I'm getting some pics this weekend hopefully i can upload them. As for safety, I'm not sure what type of safety i can offer maybe u can suggest (I never sold engine before :thumbsup: ) maybe u can suggest what the norm is?

Cheers....Ali

Thanks Sebastion.... I'm located in Bahrain, I'm not sure how much postage would cost, so I don't know if i can pay all myself or shre the postage fee with the buyer (I'll research it and update). I'm getting some pics this weekend hopefully i can upload them. As for safety, I'm not sure what type of safety i can offer maybe u can suggest (I never sold engine before :P ) maybe u can suggest what the norm is?

Cheers....Ali

hey Ali,

jeez, your a fair way away, our guess is that postage would be a fair bit, and that would be a fair dint in your pocket, as the engine is cheap enough, as for saftey, not too sure how to go about that, only thing would be paypal, but they are a rip-off... you should just sell it too one of the fella's in dubai, surely they would have enough money for an engine of these specs... cant wait to see pics mate, bet you would be disapointed to sell it, as we know how much money has been pored into it... anyways good luck with the sale mate. hopefully people realise what a bargin it is.

Hey Ali,

just a few more questions, who built the motor, ported the head etc. Is the crank stock and which T88 is it ?

Cheers,

Stav

our guess would be the 38gk, as thats rated a tad higher than 1000hp.

Is this for real??.....

Sounds abit suspicous to me....

Why Suspicious? I had an R33 I was building for the drag race, but i got a good price for a sale without the engine... now I'm stuck with the engine, I was gonna put it in my 180sx but traffic directorate said "no way" it would pass inspection, so I have to sell the engine now and start all over with a SR20 :P

Why Suspicious? I had an R33 I was building for the drag race, but i got a good price for a sale without the engine... now I'm stuck with the engine, I was gonna put it in my 180sx but traffic directorate said "no way" it would pass inspection, so I have to sell the engine now and start all over with a SR20 :P

3 posts and asking lots of cash..thats sus..its the internet...sorry.

just post a pic of the engine with you standing next to it holding a sign that says LHD GTR SAU...just to confirm you have it would put a genuine buyer at ease.

cheers

Edited by DiRTgarage
Hey Ali,

just a few more questions, who built the motor, ported the head etc. Is the crank stock and which T88 is it ?

Cheers,

Stav

Stav,

the negine was built by locals who have quite a succesfull drag racing team, the head was also ported by a local (no special equipment but he is good) the crank is stock and I'm not sure which T88 it is but I'll check... I attached some pics of other cars the mechanic built: the shop is called 'Get Boost' he has built many more but these are the latest....

regards,

Alipost-18738-1259065895_thumb.jpg

post-18738-1259065957_thumb.jpg

post-18738-1259065973_thumb.jpg

post-18738-1259065987_thumb.jpg

post-18738-1259066066_thumb.jpg

post-18738-1259066234_thumb.jpg

post-18738-1259066278_thumb.jpg

post-18738-1259066324_thumb.jpg

post-18738-1259066479_thumb.jpg

3 posts and asking lots of cash..thats sus..its the internet...sorry.

just post a pic of the engine with you standing next to it holding a sign that says LHD GTR SAU...just to confirm you have it would put a genuine buyer at ease.

cheers

Cool I can do that, How about I hold that day's newspaper as well :P

agreed.. $13,000 for an engine 10,000km away from a new user. if its legit, good luck trying to sell!

OK I get it... I would be suspicious as well, but that's the deal. Although I need to double check on the shipping if its too much I'll either increase price or just try to sell it in Dubai...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...