Jump to content
SAU Community

Recommended Posts

Hey guys,

Just wondering if anyone around here has a Datalogit?

I have a car running a Power FC and I am very occasionally getting a small spike of knock. It is very hard to track down as it only seems to happen when not on full load and around 4500rpm and even then I can't recreate it(only happens once every few days). I just need the Datalogit for a day so I can drive around for awhile and log the max knock at each point to work out which map point this knock is happening on.

Cheers,

Adrian

Link to comment
https://www.sau.com.au/forums/topic/299673-anyone-got-a-datalogit/
Share on other sites

hey mate if your power FC has a hand controller you can use it to monitor the knock and it will tell you the max knock also if you take it to Ed at autotech he can plug his computer in to it and it will also tell him where the hole is in your fuel map and he can also correct it the only person i trust with tuning my car really

hope this helps

Edited by rossco_01
hey mate if your power FC has a hand controller you can use it to monitor the knock and it will tell you the max knock also if you take it to Ed at autotech he can plug his computer in to it and it will also tell him where the hole is in your fuel map and he can also correct it the only person i trust with tuning my car really

hope this helps

Hey yeah I actually got the car tuned at Autotech. I already took it back and he fixed up a few things but I don't really have time to do that again. Ed did a great job though considering the problems I have had with this engine.

I do have the hand controller but it can only monitor the max knock overall, not the max knock at each point like the datalogit can. Fuel map is good, never runs too lean, its just one point where there is slightly too much ignition timing but I can't find that exact point and I don't really wanna drop the whole map a few degrees just for that.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...