Jump to content
SAU Community

Recommended Posts

I have an R33 RB25 engine I am selling in parts or as whole. The engine had low compression in every cylinder from the timing belt slipping. Although not confirmed I suspect the valves have been bent. The head has been removed and so to the camshafts. The exhaust camshaft front lobe and corresponding head journal are heavily scored.

The bottom end is still assembled. There is no turbo. Price is $300 for engine bottom end and head otherwise will sell in parts.

I also have for sale and RB25DET NEO intake manifold. GC $100

Mob. 0404002142

Ben

post-16836-1262343251_thumb.jpg

post-16836-1262343300_thumb.jpg

post-16836-1262343348_thumb.jpg

post-16836-1262343390_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/302119-wrecking-or-sell-r33-rb25-engine/
Share on other sites

I'm after that little 's' shaped hose that comes out of the rocker cover (inlet side). Is it in good condition?

Yep, have that and it is in good condition. $5 pickup or $10 posted

Yep, have that and it is in good condition. $5 pickup or $10 posted

Fantastic! where bouts do ya live mate. If it's cool with you maybe I could pick it up off you tomorrow. I might also be interested in a few other bits and pieces so i'll bring some extra cash with me. My mobile number is 0433373183 if you want to txt me yur addy.

what would you want for the rocker covers and timing covers

I don't have the bottom timing cover but the top cover is still available. $40 for the lot.



  • Similar Content

  • Latest Posts

    • Hey guys Long time lurker, I daily a nm35 stagea 250t rs four and I've had it for almost 2 years (very reliable 👌). Issues or just looking for information ill always find myself here having a read, so thought id join.  3inch stainless intake, pod filter, AM performance turbo dump pipe, 3inch hotdog, 3 and half inch stainless to 3 and half inch AM performance blast pipes. Bc racing coilovers. 18inch rims Hdi intercooler and trans cooler soon.  Here's my car
    • thanks for the advice on the box... i was thinking the 6 speed was better for cruising on the highway but on closer inspection and comparison the Rb 5 speed box was not too different...  So the choice is going to be the RB25 box... if I can save up and find one at the right price  
    • Thanks Matt, yes that's what i am aiming for. Just going to apply the right voltage and grounds to the dash connector. Hence my search for these pins... any chance you know if these pins are in the same spot as the ones on the S15 Dash connector? as mentioned above on page 8?
    • Yes, unfortunately that's the one. Signal was noisy to begin with; after driving once and looking back at the logs I saw pressure constantly swinging between 0-200psi, or staying at 0 randomly for a few seconds. There's a lot of good sensors that share the same look and feel, so don't presume they're all bad. I bought mine for 20$ off Amazon and I should have read the reviews prior, as it's clear they're junk.  I purchased a lowdollerr motorsports sensor. 
    • wedding eh.....I seem to get to more funerals than weddings or christenings these days....
×
×
  • Create New...