Jump to content
SAU Community

Recommended Posts

Well due to work and other commitments I dont have time or the energy to work on my 31 so its being stripped

All parts located in Devonport

$400 r43 gtt front brakes

$350 3 inch minld steel turbo back exhuast

$1200 rb25/rb30 hybrid with greddy copy plenum and loom

$400 brand new only dummy fitted to car t3t4 and stanless steel manifold with braced runners and used 38mm waste gate

$400 suspention arms with new nolithain bushes

$150 front sturts with white line springs and kyb shocks

$50 hot plates

$80 044 copy and 1ltr surge tank

$100 r31 coupe steering rack

$300 bucket seats mounted on r31 bases

$350 timex boost, oil pressure, air/fuel and temp gauges with remote

$300 timex tacho and speedo in one gauge

$50 good condition silo steering wheel

$400 16x8 +25 speedy rims with 2 good 225/50 r16 and to bald. one has gutter rub

$350 s3 front bumper with lip and vent in primer

$100 rb30e

All so have a few power steering pumps and altinators off rb30s

Thats just off the top of my head. I will up date as I work more out

Link to comment
https://www.sau.com.au/forums/topic/305371-wrecking-s2-r31-silo-with-rb30det/
Share on other sites

Yeah its a pitty to have to do this but with work and other commitments I don't have time to work on it and my gf is about ready to get her licence so I need another car so the 31 has to go

pretty f**king soft red. oh and them seats where only $280 brand new rip off prick hahaha

Shell is also for sale. Price deppends on what parts are still in it. registered until the 08/02/2010 then has the 90 day to re register it

$50 1:1 fuel reg (cant rember brand but its from repco (not monza tho))

Edited by lawler
Well due to work and other commitments I dont have time or the energy to work on my 31 so its being stripped

All parts located in Devonport

$400 r43 gtt front brakes

$350 3 inch minld steel turbo back exhuast

$1200 rb25/rb30 hybrid with greddy copy plenum and loom

$400 brand new only dummy fitted to car t3t4 and stanless steel manifold with braced runners and used 38mm waste gate

$400 suspention arms with new nolithain bushes

$150 front sturts with white line springs and kyb shocks

$50 hot plates

$80 044 copy and 1ltr surge tank

$100 r31 coupe steering rack

$300 bucket seats mounted on r31 bases

$350 timex boost, oil pressure, air/fuel and temp gauges with remote

$300 timex tacho and speedo in one gauge

$50 good condition silo steering wheel

$400 16x8 +25 speedy rims with 2 good 225/50 r16 and to bald. one has gutter rub

$350 s3 front bumper with lip and vent in primer

$100 rb30e

All so have a few power steering pumps and altinators off rb30s

Thats just off the top of my head. I will up date as I work more out

Hey mate would you do the seat for 250???

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also seen this as an option 
    • I get you, we’ll see I’m aiming for 200ish kw now and hopefully 300rwkw down the line after some upgrades maybe like headstuds, E85 flex fuel etc  so trying to make it final for that now, I can get a GTT airbox for $280 so it’s not too bad but not sure if there’s better ways to spend that money. I seen online they say pod filter which isn’t enclosed isn’t good especially for a plus T.      hard to say what to do
    • Meh. How much power can you make from a +T anyway? I wouldn't have though it would be enough to challenge the airbox. It's not as if it's tiny compared with the turbo one. As to putting a pod in a stock airbox .... it's not the filter element that would be restrictive. It would be the air inlet to the box that would be the narrow point, which you could open up regardless of what element was inside. On my R32 I opened up the sort of triangular opening in the bottom front corner of the box, deformed (heated, moulded) some 4" stormwater pipe to fit to that opening and punched a 4" hole down through the inner guard to the spot where the stock intercooler used to be. This was purely in the search for a cold intake, but you could do something similar if you need to open up the inlet side of it. The AFM tube size is the same for both NA and turbo, so the outlet from the airbox is same same anyway. If you're going to do the right thing, then an aftermarket ECU won't care about the AFM (ie, you can get rid of it). But even if it was still there, people pull >300rwkW through them all day, and I suspect you won't be going there.
    • R34 RB25de Neo by the way ^ 
    • Doing a +T on my car and I’ve read the precious forums lots of mixed reviews from sometime back.  checking if anyone has any ideas for airbox or enclosed pod filter or solutions?  I was thinking stock GTT box but some say it’s restrictive? I seen some people try fit in a pod in the box anyone done that recently?  not any good enclosed options ? Thanks 
×
×
  • Create New...