Jump to content
SAU Community

Recommended Posts

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Its more about weight transfer Bunt. In a car you turn the wheel and it transfers the weight for you. On a bike to go fast you have to climb all over them like a monkey on a stick each time you want to change direction. It takes time.

twas an r6

as Noel says they have no rubber on the road

I admit generalisations suck balls. How many people with a decent set up car are going to be running from the cops? The majority of them are going to be 33s with china crap coil overs and standard brakes with a set of nankangs. In a perfect world a decent car is going to do alright but in reality its only ever going to end bad.

Its more about weight transfer Bunt. In a car you turn the wheel and it transfers the weight for you. On a bike to go fast you have to climb all over them like a monkey on a stick each time you want to change direction. It takes time.

I'd say time lost in corners could more than be made up for with the wicked acceleration. Not going to argue hypotheticals anymore though.

I dont deal in hypo's. Here's a small mathematical equation for you.

A well shod bike has about a 50 mil contact patch with the road both front and rear. thats about 100 mil total.

A well shod car. (will use mine for the sake of the excercise) has 1 metre and 60 mil of contact area on the road.

A Busa weighs in around 350 kg, my car weighs in around 1300 kg.

Which do you think will stick better?

As for their giddyupgo in a straight line. Blistering, but certainly not twice as quick as the car. If memory serves me they do a low 10 second 1/4 mile. I do a low 11.

On anything but a straight road I will eat his lunch. (and have done) :D

I dont deal in hypo's. Here's a small mathematical equation for you.

A well shod bike has about a 50 mil contact patch with the road both front and rear. thats about 100 mil total.

A well shod car. (will use mine for the sake of the excercise) has 1 metre and 60 mil of contact area on the road.

A Busa weighs in around 350 kg, my car weighs in around 1300 kg.

Which do you think will stick better?

As for their giddyupgo in a straight line. Blistering, but certainly not twice as quick as the car. If memory serves me they do a low 10 second 1/4 mile. I do a low 11.

On anything but a straight road I will eat his lunch. (and have done) :D

Busas run 120/70 fronts and 190/50 rears. Say half of that which is 155mm contact patch. Pretty poor but they weigh a fair bit less than 350kg. Closer to 250kg with a full tank. The car will stick to the road better but that doesn't necessarily mean it will get away.

Still a fair bit of difference between a low 11 and a low 10. A busa will do 0 - 100 in under 4 secs and 0 - 160 in under 7 seconds. Street cars running that quick are the exception rather than the rule.

Busas run 120/70 fronts and 190/50 rears. Say half of that which is 155mm contact patch. Pretty poor but they weigh a fair bit less than 350kg. Closer to 250kg with a full tank. The car will stick to the road better but that doesn't necessarily mean it will get away.

Still a fair bit of difference between a low 11 and a low 10. A busa will do 0 - 100 in under 4 secs and 0 - 160 in under 7 seconds. Street cars running that quick are the exception rather than the rule.

Wasting my time. Been there done it. Let me know when you have. And fwiw, The bike tyre due to the neccesity of its shape has far less road contact patch than what you claim.

Wasting my time. Been there done it. Let me know when you have. And fwiw, The bike tyre due to the neccesity of its shape has far less road contact patch than what you claim.

Both my parents ride 1000cc sport bikes and I always find it difficult to keep up. Reverse positions and they never have a problem keeping up with me. As I said well set up cars are the exception rather than the rule.

Both my parents ride 1000cc sport bikes and I always find it difficult to keep up. Reverse positions and they never have a problem keeping up with me. As I said well set up cars are the exception rather than the rule.

Give me your keys. :D

hyabusa weighs 220 kg dry. add fluids and a rider and they will see 300 plus kg's easily. :D

Add all the shit a copper has to carry and they will more than top out 350 kg.

Now STFU. :P

So 1300kgs in your car is with a driver n all? I assumed you were comparing a car without a driver with a bike with a rider n that seemed a bit unfair.

So 1300kgs in your car is with a driver n all? I assumed you were comparing a car without a driver with a bike with a rider n that seemed a bit unfair.

think about it. I add 93 kilo to the weight of the car. Less than 10 percent.

The copper adds a minimum of 90 kg. What percentage do you think that is?

Call the car 1400 kg for the excercise. Its contact patch v weight still far outdoes that of the bike.

And i dont have to climb all over the bike to get it to change direction in a hurry. I simply move the wheel and sit there solid as a rock in a full bucket seat.

i agree with everyone who says that the bike will be slower. the only reason why the cops might have these is simply to catch other bikes. or possibly on a highway pursuit. but round the narrow streets the bikes would get left for dead. while the busa might have accelleration from hell, it's handling (compared to other sports bikes) will send you there pretty quickly.

i've seen a police chase in town where a v6 commodore cop car was right up the arse of the bike it was chasing, until they got onto a straight section of road where the bike was able to pull away a bit. i was coming up to an intersection when the bike went flying past with the cop car right behind it. they had just come up a windy section of road

the only reason why the cops might have these is simply to catch other bikes

this would make sense, anyone who has been up the hills would know that there are sections with huge signs saying "MOTORBIKE CRASHES HAVE OCCURED IN NEXT 10KM" or something to that effect..

so they could just be there for that

or could be used to hide and catch spirited drivers speeding..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • OK, Step 3, if you need to remove the valve body, either to replace it, the TCM, or to do a more complete drain.  First, you need to disconnect the TCM input wires, they are about half way up the transmission on the drivers side. One plug and the wires are out of the way, but there is also a spring clip that stops the socket from sliding back into the transmission. On my car the spring clip was easy to get, but the socket was really stuck in the o-ring of the transmission housing and took some.....persuasion. You can see both the plug to remove (first) and the spring clip (second) in this pic Incidentally, right next to the plug, you can see where the casting has allowance for a dispstick/filler which Nissan decided not to provide. there is a cap held on with a 6mm head bolt that you can remove to overfill it (AMS recommend a 1.5l overfill). Final step before the big mess, remove the speed sensor that is clipped to the valve body at the rear of the box.  Then removal of the Valve Body. For this the USDM Q50 workshop manual has a critical diagram: There are a billion bolts visible. Almost all of them do not need to be removed, just the 14 shown on the diagram. Even so, I both removed one extra, and didn't check which length bolt came from which location (more on that later....). Again it is worth undoing the 4 corners first, but leaving them a couple of turns in to hold the unit up....gravity is not your friend here and trans oil will be going everywhere. Once the corners are loose but still in remove all the other 10 bolts, then hold the valve body up with 1 hand while removing the final 4. Then, everything just comes free easily, or like in my case you start swearing because that plug is stuck in the casing. Done, the valve body and TCM are out
    • OK, so if you are either going for the bigger fluid change or are changing the valve body which includes the Transmission Control Module (TCM), first you should have both a new gasket 31397-1XJ0A and a torque wrench that can work down to 8Nm (very low, probably a 1/4 drive one). You can probably get by without either, but I really didn't want to pull it all apart together due to a leak. First, you now need that big oil pan. The transmission pan is 450 long x 350 wide, and it will probably leak on all sides, so get ready for a mess. There are 24x 6mm headed bolts holding the pan on. I undid the 2 rear corners, then screwed those bolts back in a couple of turns to let the pan go low at that end, then removed all the middle bolts on each side. Then, undo the front corner bolts slowly while holding the pan up, and 80% of the fluid will head out the rear. From there, remove the remaining bolts and the pan is off. You can see it is still dripping oil absolutely everywhere...it dripped all night.... I got another couple of litres when I removed the pan, and then another few when I removed the valve body - all up another 4l on top of the 3 already dropped in step 1.
    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
×
×
  • Create New...