Jump to content
SAU Community

Recommended Posts

Have swapped out my HRE wheels (which have the TPMS installed) for the stock wheels (which don't have the TPMS installed) about a week ago and have been driving around since.

one of the tpms sensors in the HRE wheels is damaged and always throws an alert

I am not however generating an error code for the set of stock wheels which do not have any sensors which I find unusual (not complaining)

what does everyone get when they put on their wheels without the TPMS normally?

Link to comment
https://www.sau.com.au/forums/topic/307706-tpms/
Share on other sites

i believe it only checks for the presence of the TPMS sensors periodocally. ie. it will not throw an error straight away. one possibility is that you fit the new wheels, go for a 15 minute drive, park it back in the garage afterwards (where your OEM wheels are presumably) and in that time it communicates with the sensors on the OEM wheels stacked near the car. you then go for a drive again, then come back, it "resets" again. just a possibility. the other possibility is they are working fine (i hope so, because if so, i will be getting a set!)

Link to comment
https://www.sau.com.au/forums/topic/307706-tpms/#findComment-5085800
Share on other sites

what is odd though is one set of wheels driven for a week now has no TPMS. I might be away from home for 12 hours or more on occasion and have driven for a couple of 20 min trips in the meantime.

you are corect though in assuming the second set is close by, maybe 5-6 m away from the car.

I take it if I got a second set of tpms for the track wheels that these would have to be paired up with a consult III and that tpms sensors are not swappable in the way that different bluetooth devices recognise phones in order of preference and availability? I am not sure exactly how they work and neither are the boys at my dealership.

Anyone now of a cheap place locally for TPMS by the way? I know of an ebay international vendor that sells them but wondering if any available locally

Link to comment
https://www.sau.com.au/forums/topic/307706-tpms/#findComment-5085924
Share on other sites

if i were to drive to the track with 18's i get the error yep.

however if i swap them on at the track (with the OEM wheels in the garage at the track) i dont get the error (because of the reason mentioned above). frequent visits back to the garage (where the OEM wheel/tyres are) tricks the system into thinking they are on.

is there any chance that your error you are getting with the TPMS sensor needs a reset, and the system isnt throwing any more errors until that is rectified?

Link to comment
https://www.sau.com.au/forums/topic/307706-tpms/#findComment-5086153
Share on other sites

hmm, will see. week and a half with no error. the error code from the faulty tpms in the separate set of wheels in the garage used to come on daily, now none. That sensor was not installed correctly and was found free, rattling around in the wheel for a week until I could work out what the sound was so I think the error is due to physical trauma.

Link to comment
https://www.sau.com.au/forums/topic/307706-tpms/#findComment-5087824
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Ok so will run the piping over that radiator and no plenum it is. Put that money towards a Haltech and see what suits. Any ideas something like an elite 2000 or 2500 right? My long term goal is 300kw e85 and manual swap and that’s a dream come true. For now will be 200kw and auto the stock rb25det neo intake isn’t too expensive with throttle body. If I was to have the port matching done, Would that be better than the stock de intake as the det has bigger holes plus has the spots for sensors etc? And suit more long term?  appreciate the advice?   
    • You understand AFR is not the only thing that contributes to it pinging yeah? Funnily, what the AFR gauge will tell you when it likely is pinging, is going to make you think things are really safe and good.
    • Run the piping how we all have for decades. Also the duel runners with the +T setup dramatically helps it gets on boost quicker. Yes, chase huge power it'll become a problem, but you're a long way off when you're already saying an aftermarket ECU is out of the budget. You also say NisTune as it's simple, and then immediately say it'll be painful, meaning... It won't be simple. It will likely cost you a lot more stuffing around with a Nistune, than just putting a Haltech or similar in.
    • I’ll order an afr gauge to keep an eye on it.  Then will get a haltech soon 
    • TD05 or maybe pulsar PSR2867r Gen 2?  id love a garret but it’s quite out the budget for now and I’m not chasing crazy power.    yeh fuel pump haven’t looked into but whatever works, kind of last on my list.    Nistune because it’s simple but Ik it’s a lot of pain especially as I’m auto +t with the whole seperate TCM etc still investigating that. Haltech id love but once budget tight for now atleast.    finally the reason I’m trying for a plenum instead of the stock intake is I already have a standard Intercooler mounted etc. so the ports are on both sides so trying to not have to go over the clutch fan radiator etc. trying to find a good deal return flow if I don’t than this will do for now I guess. btw any ideas with that, apparently some people have to cut blades to reduce it from hitting the Intercooler piping over the radiator ? Thanks 
×
×
  • Create New...