Jump to content
SAU Community

Recommended Posts

Hello All!

I have on sale a Pioneer Carrozzeria FH-P050MDzz in perfect and working condition! This unit is made and sold only in Japan. Carrozzeria is Japanese branding for Pioneer car audio lines. This unit plays both CD and MD, and is also compatible with MP3, WMA, WAV, MDLP and can read from a CD-R/RW. Also it has a cool black display. The backlight is sharp black and all the texts are displayed in white color. The equaliser and display is awesome! It makes this unit very unique and eye catching -- I assure you.

The reason I am selling is because I have already installed my favourite single DIN Alpine from my previous car :down:

It has plenty of functions, such as DSP, EQ, Subwoofer control, 3-mode SFC etc. Your existing Pioneer or Premier CD changer with IP-bus works with this unit perfectly.

Please note that in Japan, radios are made to receive in the 76 MHz to 90 MHz band, but in Australia, bands through to 108 MHz. To solve this matter, you may use an FM expander (around $12.00 from Autobarn/Super Cheap Auto). The expander is an add-on unit you install between your car antenna and the back side of this unit - VERY EASY - if I can do it, you can too :D

Asking price: $170.00

Pickup or sent via registered post (at your expense).

---------------

Specifications:

---------------

[Amplifier]

● 50Wx4

● Maximum output: 50Wx4

[Ministry Audio]

● Output Subwoofer: Cut-off frequency: 50/63/80/100/125Hz, Slope cut-off: -18dB/-12dB/Oct, Width adjustment: +6 ~ -24dB, Phase: NOR / REV, high-pass filter (F / R Independent): "cut-off frequency> 50/63/80/100/125Hz <slope cut-off>-12dB, -6dB/oct.

● 9-Band Graphic Equalizer, Frequency: 50/100/200/400/800/1.6k/3.15k/6.3k/12.5kHz, Width adjustment: 12dB

● Loudness (volume:-30dB): 10dB (100Hz), 7dB (10kHz)

● Maximum output level: 1.8V/1kΩ

[CD Player]

● Frequency Response: 5 ~ 20,000 Hz (1dB)

● SN ratio: 94dB (1kHz) (IHF-A network)

● Dynamic range: 92dB

● MP3 Decoding Format: MPEG-1 & 2 AUDIO LAYER-3

● WMA Decoding Format: Ver.7, 7.1,8 & 9

● WAV signal format: Linear-PCM, MS ADPCM

[MD player section]

● Frequency Response: 20 ~ 20,000 Hz (? 1dB)

● SN ratio: 90dB (1kHz) (IHF-A network)

● Dynamic range: 90dB [Tuner]

● FM/AM ● FM / AM

● Practical sensitivity: FM/8dBf (0.7μV/75Ω, mono, SN Ratio: 30dB), AM/18μV (SN ratio: 20dB)

Of the Common

● Maximum current consumption: 10.0A

● Mounting dimensions: 178 (W) x 100 (H) x 161 (D) mm

● Weight: 1.8 KG

post-70239-1266668786_thumb.jpg

post-70239-1266668846_thumb.jpg

post-70239-1266668917_thumb.jpg

post-70239-1266668933_thumb.jpg

Edited by theponyremark
Link to comment
https://www.sau.com.au/forums/topic/309004-pioneer-carrozzeria-fh-p050mdzz/
Share on other sites

Hi,

No it has no AV output, however, there is a remote control sensor on it. According to the Japanese manual (http://www3.pioneer.co.jp/manual/manual_pdf.php?m_id=1173) it includes an AUX but I believe it's from the rear plug to loom.

Edited by theponyremark

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...