Jump to content
SAU Community

Recommended Posts

So, long story short - car has been scratched because of a garage issue. Wont go into it as im still upset..

anyway, the paint is gone, and the scratch is too long and wide for that stupid pen. Will have to get it fixed eventually, but is there any stuff i can buy like those magic pens except easier to apply with a paint brush? Will need to protect it from rust.

Link to comment
https://www.sau.com.au/forums/topic/309319-deep-scratch/
Share on other sites

They're double sided pens with my exact paint color code. so for stone chips etc you just apply with the pen and on the other side is a clear coating to seal it. Its only good for little chips we all get on our front bumper really.

Ogz, im in brisbane but looked up the touchupguys here and they seem legit. Will take before and after pics for anyone whose interested in brisbane.

Link to comment
https://www.sau.com.au/forums/topic/309319-deep-scratch/#findComment-5101269
Share on other sites

Anybody out there that wants a job done as good as a panel shop but a hell of alot cheaper try these guys, And not just for scratches they will even fix small dents and few other mishaps , alloy wheels etc. All in the comfort of your drive way.

http://www.thesmartguys.com.au/

Not a franchise so go the National Pricing.

Link to comment
https://www.sau.com.au/forums/topic/309319-deep-scratch/#findComment-5102127
Share on other sites

there is now new restrictions in terms of shipping this from overseas.. Due to its liquid substance majority of the dealers there do not choose to sell this to overseas customers, however you can always try. I tried before and failed, so i just went to local nissan dealer parts and got mine for $15.00.

Link to comment
https://www.sau.com.au/forums/topic/309319-deep-scratch/#findComment-5111969
Share on other sites

went to nissan today they have it, its a nail polish sorta thing and you apparantly apply it, the guy there didnt know anything about it, so im wondering do you need to prep the car or do anything before applying it? also does it blend with the colour and surrounding or would it stick out like a sore thumb?

Link to comment
https://www.sau.com.au/forums/topic/309319-deep-scratch/#findComment-5112600
Share on other sites

Ive used the same from g35parts, IMHO they are ok for very small areas, anything other than that you`re better off getting it done either at a bodyshop (dependant on extent of damage) or by some touch up franchise (do your research first as Ive seen some appalling work)

My bodyshop does stuff like full bumper respray etc and I use chipsaway (local franchise) for any light scratching/stone chips elsewhere.

Good luck in getting your 350 sorted

S

Link to comment
https://www.sau.com.au/forums/topic/309319-deep-scratch/#findComment-5113380
Share on other sites

Hey sai how much does it usually cost ya to do those scratches and stone chips?

  saihaynes said:
Ive used the same from g35parts, IMHO they are ok for very small areas, anything other than that you`re better off getting it done either at a bodyshop (dependant on extent of damage) or by some touch up franchise (do your research first as Ive seen some appalling work)

My bodyshop does stuff like full bumper respray etc and I use chipsaway (local franchise) for any light scratching/stone chips elsewhere.

Good luck in getting your 350 sorted

S

Link to comment
https://www.sau.com.au/forums/topic/309319-deep-scratch/#findComment-5114134
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I got a Fenix for my LS1 VZ Commo last yr and it was a perfect fit and I liked the quality of it.
    • Can you help!   Can you tell me a few places you got your Flex Fuel Kits installed in Sydney The only one I know of is Tunehouse. Thanks in advance!!!  
    • Yea my thought was tighter engine when hot is more load a poor ground connection can't take. On that note, I had time to check my driveshaft verical alignment tonight, it's +2 and -2 at either end, so thats perfect and how I had set it up last year. What would be the easiest way to check horizontal alignment between my diff and transmission? I can think of a few ways but they're all complicated and I feel like I'm overthinking it. I'm hoping it's that as I can't see any other reason why I have developed driveline vibration since I put the motor back in. 
    • Thank god. I thought I was the only one, nobody seems to mention this (cause nobody really goes this far in Sedan land). The car's track is 10mm wider at the rear, which explains why the rears sit a little further out for the same size wheels. There's not really many options in widebody land for sedans anyway - People will just use whatever came out of the box and then buy wheels/spacers to suit. To get it perfect you'll likely need custom wheels with custom offsets if you really want to get it perfect which is what I plan to do, but I also plan to utilize more of the inboard space for tyres at the rear... which is also something nobody ever seems to do.... OR my maths have failed me after 20,000 attempts and I'm about to make huge mistakes. 
    • What colour is that?  A mate of mine went red/black on his SLR5000 tribute recently also.  And yes, also glad to see this still progressing albeit slowly. 
×
×
  • Create New...