Jump to content
SAU Community

Rb25det, Only 77000 K's + Auto Driveline.

RBNRG
 Share

Recommended Posts

RBNRG Enthusiast

RBNRG

Posted
Posted

As said, Series 2 RB25det @ 77,000k's

Ran great before being ripped out and replaced with a forged item from a writeoff.

Located in Deception Bay [northside Brisbane] and contact number is 0401297648 [sms only]

AUTO DRIVELINE - PM me

ENGINE* - 2100 ono

ENGINESALE.jpg

*Please note a small part of the loom for the engine and the auto box are missing. These were needed to get my other Skyline running.

*Engine are still kept under cover at all times.

Thanks.

RBNRG Enthusiast

RBNRG

Posted
  • Author
Posted

have convertor, flex plate, auto dash, gearleaver plus interior surround, gearshift linkage, drive shaft, diff, autobox which is however missing some wiring and this [below] which connects to the linkage.

Photo3172.jpg

bazr33 Mentor

bazr33

Posted
Posted

I may be interested in the auto and convertor, flex plate, auto dash, gearleaver plus interior surround, gearshift linkage, although need to see what I can do re the missing wiring - ncan you indicate how much you will let this go for?You can call me on 0403829350

  • 3 months later...
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      What should I do next to hold the head on

      By Dose Pipe Sutututu · Posted

      Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • GTSBoy
      boost source Size Garrett gt28 gen2

      By GTSBoy · Posted

      Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Dose Pipe Sutututu
      boost source Size Garrett gt28 gen2

      By Dose Pipe Sutututu · Posted

      Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...