Jump to content
SAU Community

Recommended Posts

Heaps of parts for sale - grab a bargain today!!!!!

1. HKS CAMS & HKS CAM GEAR RB25DET-

Up for sale are some quality performance parts that have been taken out of my previous Nissan Skyline R33 dyno tuned at 298.4rwkw. Some items were only used for about 4 months before I decided to strip it off and sell it separately. The cams are in good working condition and sound amazing. They are 256 degree and fit straight into the rb25det engine, no modification or valve spring etc needed. The HKS cam Gear is also a must in order to achieve fine tuning. Please check out the other auctions and do not hesitate to call 0421 741 367. CAMS $480 o.n.o CAM gear $130 o.n.o

2. XTC STAINLESS STEEL MANIFOLD GCG RB25DETT- BRAND NEW

This quality manifold was purchased for $1000 from GCG Sydney and was never used. It comes with the fitment parts and a external waste gate outlet. This manifold can handle big horsepower with no hassle or risk of cracking, unlike the cheap Chinese versions. My loss can be your gain. Please check out the other auctions and do not hesitate to call 0421 741 367. $550 o.n.o

3. Quality Brand New 38mm External Wastegate- Warranty from Hyper Gear .

This wastegate has never been used so the condition is brand new. It is from Hyper Gear in Melbourne (Digi-Hardware) and purchased for $299. It is of high quality standard and contains a 7psi spring. My loss can be your gain. Please check out the other auctions and do not hesitate to call or message 0421 741 367. http://www.digi-hardware.com/wastegate.html $190 o.n.o

4. HKS EVC ELECTRONIC BOOST CONTROLLER

Up for sale are some quality performance parts that have been taken out of my previous Nissan Skyline R33 dyno tuned at 298.4rwkw. These items were only used for about 4 months before I decided to strip it off and sell it separately. This boost controller is capable of running multiple boost settings, previously holding a stable and constant 18psi without any problems. All wiring etc is included. Please check out the other auctions and do not hesitate to call or message 0421 741 367. $240 o.n.o

5. AUDI A4 15INCH ORIGINAL WHEELS WITH BRAND NEW MICHELLIN TYRES

Grab a bargain these wheels are in top condition and the tyres are new Michelins. One audi cap is missing can be purchased from anywhere example tempe tyres for about 30 dollars. $350 o.n.o

For enquiries please call 0421 741 365 or PM here

wastegte.jpg

wastegatee.jpg

maniif.jpg

manifolllld.jpg

manifolld.jpg

manifold.jpg

controla.jpg

cammm.jpg

camm.jpg

camshaf.jpg

cams.jpg

camg.jpg

boostcontrol.jpg

boostc.jpg

IMG_1328.jpg

IMG_1327.jpg

IMG_1325.jpg

IMG_1324.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
×
×
  • Create New...