Jump to content
SAU Community

Recommended Posts

Just need to know how I do it, or if it's even possible to do it.

I dont have anything to plug a ethernet cable into just the wireless dongle thing.

Can I some how get the WEP code and use wireless function on the Ps3? If so, how can I find out my WEP code and any other codes I need?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/311749-going-on-the-psn/
Share on other sites

If you're talking about the mobile wireless broadband that plugs into the USB, then the PS3 cant do it. It can only go online via network access (ethernet or wireless router). There are plenty of tutes online you can find through google to get it running.

im not talking about plugging the dongle into the ps3.

just hooking up the laptop, connecting the net and running an ethernet cable to the ps3.

im just going to get a routor with the usb slots to run a wireless network through my laptop and ps3 hopefully.

cheers

In that case, all you need to do after connecting the ethernet cable to the PS3, is bridge the network connection in the laptop. Google will come up with hows to do this. It's fairly straight forward.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...