Jump to content
SAU Community

Recommended Posts

SSR Strusse 19x10 +19 and 19x11 +11 5x114.3 wheels, $2500

Freshly powder coated black centres, huge dish, tyres are stuffed but i will be looking for something better to put on them with the sale, pics to come

JJR red s13 front swaybar, $100

http://justjap.com/store/product.php?produ...at=0&page=1

never used includes bushes

Stock r32 GTR front swaybar, $50

used, comes with good bushes

Cefiro non turbo brakes (calipers, pads and rotors), $100

almost new pads, rear rotors re drilled to 5 stud

R33 gts-t brake booster, $50

R32 GTR clutch pedal, $50

S13 clutch pedal, $50

cefiro non turbo radiator, $50

might need a flush, includes shroud and hoses, good for a spare (no leaks)

cefiro stock front suspension, $50

shocks have seen better days but good to get through regency

6x4 trailer with tradesman top, $1500

excelent condition, with rego

Bridgewater

0423 452 773, 0417 867 992 or pm with email address for more pics

post-69804-1269742331_thumb.jpg

post-69804-1269742344_thumb.jpg

post-69804-1269742351_thumb.jpg

post-69804-1269742359_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/313894-sa-shed-cleanout/
Share on other sites

hey mate, the 32 gtr swaybar,

how much of an upgrade are they over the gtst swaybar? if at all

cheers

mate i have no idea, all i know is it wont fit a cefiro haha. feel free to give us a call if you want to come and have a look and compare with gtst item

also have a pair of white 17x7s 4x114.3 and 4x100, +40, good as skid wheels etc. one has a chunk out of the lip but still holds air fine (tyre has been inflated on it for the last 6 odd months that they have been sitting around. tyres are 235 45 17 cheapies with atleast 50%, but one has a hole in the sidewall, after $50

1x maxxis 215 45 17 ma-z1, has had a puncture repair at some stage, lots of tread as pictured, $20

spoiler thing, no idea what its off. uh... its white... $20?

post-69804-1269930869_thumb.jpg

post-69804-1269930885_thumb.jpg

post-69804-1269930904_thumb.jpg

post-69804-1269930950_thumb.jpg

post-69804-1269930966_thumb.jpg

Are you missing an Alpine remote ?

I just found one in the back of those black seats you sold me ages ago.

RUE-3187 is what's written on it. If you want me to post it back, gimme a call / sms, otherwise I'll just bin it...

-Nic

STILL AVAILABLE:

JJR red s13 front swaybar, $100

http://justjap.com/store/product.php?produ...at=0&page=1

never used includes bushes

Stock r32 GTR front swaybar, $50

used, comes with good bushes

R33 gts-t brake booster, $50

R32 GTR clutch pedal, $50

S13 clutch pedal, $50

6x4 trailer with NICE BIG TOP QUALITY tradesman top, $1500

excelent LIKE NEW condition, with rego

10 CD stacker and head unit for sale. upgraded my stereo. has mount brackets and the cables, oh and a remote. $100.

pair of white 17x7s 4x114.3 and 4x100, +40, good as skid wheels etc. one has a chunk out of the lip but still holds air fine (tyre has been inflated on it for the last 6 odd months that they have been sitting around. tyres are 235 45 17 cheapies with atleast 50%, but one has a hole in the sidewall, after $50

1x maxxis 215 45 17 ma-z1, has had a puncture repair at some stage, lots of tread as pictured, $20

spoiler thing, no idea what its off. uh... its white... $20

Bridgewater

0423 452 773, 0417 867 992 or pm

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The cross sectional area of a circular hole scales with the square of diameter. So a 2mm diameter hole is 4x the area of a 1mm hole. Not double. The 1.7mm hole is nearly 3x the area of a 1mm hole. You do not need restrictors at both ends of the oil supply line. If you have new, additional restrictors at the turbo end, that you did not have before, then you do not need a restrictor at the inlet end.
    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
×
×
  • Create New...