Jump to content
SAU Community

Recommended Posts

Make/Model: Nissan S14A

Year: 1996

Kilometers: 165,xxx

Transmission type: 5spd manual

Engine: SR20DET

Colour: Red

Modifications: See below

Roadworthy Certificate: N/A

Registered: Yes, til late July.

Accident History: None.

Asking Price: $17k... open to sensible offers though.

Location: Adelaide SA

Contact Details: PM, or call 0408961657 after 5pm.

Other Comments:

Regretful sale, but its time to move on.

The whole story for this car can be found here... with the slightly less in depth ns.com version here.

Bought it dead standard in late '08 with 151,000ish kms on it.

Since then, I've done all this;

Interior & Electronics;

Clarion DB286USB HeadUnit

Clarion SRG1620R 2 ways (parcel shelf)

Clarion SRQ1620S Components (doors)

NISMO Gearknob (+ dildo shifter for shits and giggles)

JDM S2 stereo, climate, and gear surrounds.

VELO GP90 Drivers Seat on modified Bride rail

STRI White Face Gauges for; Boost.

Shadow White Face Gauges for; oil temp, oil pressure.

PIVOT Water temp gauge

Bosch 6000K HID kit and arctic white parkers

Extended + battery cables

SuperCharge Slim battery

35% Tint

Engine/Intake/Exhaust/Cooling;

Standard turbo rebuilt and highflowed to 2860 specs

Genuine Nissan coolant

K&N Oil Filter

HKS Alloy suction kit

Elf Excellium 5w/50 fully synthetic

NGK BCPR6ES plugs (.8mm gap)

Modified Airbox w/ cold air duct + K&N element

M/Steel 3" Apex'i Catback exhaust

AM Performance S/Steel Dump & Front (with seperated wastegate flow)

X-Force Catalytic Converter

Brand new Genuine Nissan Gaskets for; Mani -> Turbo, Turbo -> Dump, Cat

Brand new Genuine Nissan turbo studs

Brand new Genuine Nissan Water lines

Braided Steel oil line

Deleted BOV

Cooling Pro FMIC w/ custom brackets

Custom S/Steel 2.5" intercooler piping

Turbotech MBC (hybrid ebc wired in, needs tune)

Earls oil cooler and relo kit with speedflow fittings

R33 GTR fuel pump

Nismo Mounts

KTS Engine Torque Damper

Driveline;

Standard 5 spd Box

Xtreme Heavy Duty Organic Clutch

Nismo Mount

Standard Nissan "LSD"

Wheels & Tyres;

Front;

Enkei Circlar 17 x 8 +35 Resprayed in ROH silver

Work Mesh 17 x 8 +5

Work Equip, 17 x 9 +17 (estimate)

225/45 Kumho KU36

Rear;

Enkei Circlar 17 x 9 +38 Resprayed in ROH silver

Work Mesh 17 x 9 +11

Work Equip, 17 x 9 +17 (estimate)

235/45 Dunlop Direzza DZ101

Brakes;

Front;

RDA Slotted Rotors w/ ACRE Street pads

HEL Braided lines

Rear;

RDA Slotted Rotors w/ QFM HPX pads

HEL Braided lines

Fluid;

Penrite syn 600

Suspension & Steering;

Cusco Zero 2 R Coilovers

Cusco Front strut brace

Cusco Camber Arms

KTS Tie rod ends

Kazama castor rods

Body;

JDM Kouki wing

JDM front bumper w/ foglights

Navan Zenki side skirts

Navan Zenki rear pods

Rolled guards

Domokun chilling the rear quarter glass.

Performance;

136rwkw @ Graham West Workshop (Catback exhaust, exhaust leak at turbo, missfire, 11psi, 14/3/09)

171rwkw @ Morpowa (dirty and untuned, 2860, full exhaust, cooler, standard pump, 14psi, somewhat naffed pump)

170rwkw @ Morpowa, same as above, but with gtr pump and mega rich mixtures.

PB of 1:27:00 @ Mallala.

On top of all that, its getting a brand new pair of kumho KU36's on the front in the coming days (rrp $560), the old KU36's will be moved to the rear.

There's a new set of A1RM rear pads coming ($119).

And I'll throw in a set of blitz 550cc injectors, an ATS carbon single plate clutch (that needs a rebuild), and if wanted, i may be able to arrange a Z32 afm with plug for an additional $200.

I'll also be including, 4 stockies, 2 with legal tread, 2 without, standard dump and front pipe, standard drivers seat, standard struts/arms/rod ends, standard front bar, standard intecooler/pipe work/bov, standard boost solenoid, spare rear garnish, spare bootlid w/out spoiler (does have holes).

I'm happy to remove parts to make it more affordable.

I am however, in no rush to sell it, keep that in mind.

Now for the nitty gritty, yes, it has been tracked (3 times), and yes, it has been driven hard, there no point hiding that.

However, its been religiously maintained, I don't stick to a service schedule so much as service it whenever I believe it's appropriate... or have nothing better to do. As such, it's been serviced with quality oils (at first, motul, more recently; elf excellium) and filters (nissan, and more recently k&n) every couple thousand kays (about 9 times since purchase). It's most recent service was 2 weeks ago, changed oil, filter, plugs, fuel filter, and fitted a brand new k&n air filter. I'll be servicing it again in the coming days.

A compression test was performed mid last year for peace of mind, came back with 141-145 across the board, a leak down test was performed at the same time and returned results within factory tolerances.

A suspension safety checked was performed recently, with everything showing up apples, but, the steering rack bushes are starting to show wear.

And its passed regency with minimal work, standard wheels, borrowed standard exhaust (or baffle plate), standard boost controller, removed gauges, standard seat, and it's through without incident.

Now for the bad. there are a couple small chips in the paint, and some poorly repaired parking lot damage to the rear drivers side guard. I'll get pics of all this up later... and that's about it.

Basically, as it is, it's an lsd and a remap away from being whatever you want, drift car, grip car, hills car, or just leave it as is and have a bullshit tough streeter, it's up to you.

838309482_oAwyJ-M-1.jpg

835674108_k53PX-L-1.jpg

IMGP0239.jpg

IMGP0172.jpg

IMGP9635.jpg

IMGP9930.jpg

IMGP6530.jpg

IMG_3770.jpg

IMG_3769.jpg

IMG_3771.jpg

IMG_3777.jpg

IMG_3780.jpg

sandwich.jpg

post-a253946-IMGP3271.jpg

IMG_3159.jpg

IMG_2132.jpg

IMG_2559.jpg

IMG_3174.jpg

Edited by scandyflick
Link to comment
https://www.sau.com.au/forums/topic/317477-96-s14a/
Share on other sites

just realised, ive basically copypasta'd this from a build thread and some of the coding didnt come along with it.

so i should probably point out that only the work equips and stockies are included in the sale, the other 2 sets have been sold.

Link to comment
https://www.sau.com.au/forums/topic/317477-96-s14a/#findComment-5193429
Share on other sites

bump.

new tyres will be fitted up today. and im chasing up another set of new rear brake pads as im getting sick of waiting for my qfm's to rock up.

Link to comment
https://www.sau.com.au/forums/topic/317477-96-s14a/#findComment-5197313
Share on other sites

  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...