Jump to content
SAU Community

Recommended Posts

Hello!

Keefe here, originally from Singapore(Still in Singapore, actually :) ), and I'm temporarily moving down to Australia, Victoria for the next two years to study.

Hoping to be part of the exciting Skyline family in Australia, and getting pointers on how to complete all the paper work when you transfer ownership between cars in VIC.

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/322528-moving-down-under-soon/
Share on other sites

Is UOM university of melbourne? If thats the case, you're pretty close to rmit.

What do you need to know about eh? Be patient when looking for your car, drive many, and don't convert your singaporean license to the victorian one, you can drive fine with our singaporean license.

Check out carsales.com.au

RMIT? Sorry, I thought you meant Monash! Hip hip hoorah then. I might just be seeing your around town.

Drive many? In that sense, try as many cars there as you can before you make a decision? And cool, I figured just as much reading VicRoads, but there are still questions that they don't answer fully, or rather, are quite ambiguous in that sense.

And finally, yes, already gone over and seen that webbie. Quite a nice number of cars there, tbh. Looks like I'll just have to shortlist and then make decisions. Your input is most welcome!

Frankly, i know shit about cars, i just drive them, and send them to a mech if something goes wrong.

But generally they're pretty reliable, the RB/SR engines. Read around on the forum, under the turbo/nonturbo sections and you should learn way more. Check out the vic section too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m here solo don’t have any hands to help so haven’t hit it with a timing light 
    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
×
×
  • Create New...