Jump to content
SAU Community

Recommended Posts

the idicator is all orange not a clear,just to let you know.yeah widow switch works fine.

ok. Didnt end up needing the indicator, but still interested in the window switch.

Is $40 + postage ok?

is the link ecu just a remapped unit , or is is live tuning enabled?

i think it live tuneing do u want more photos link is printed on the actual board and all the chips

Is the diff complete in a housing? whats the diff ratio too? thanks

nah theres a pic on first page, it the centre half shafts and drive shafts,cost me $750 and havent even used it,it done about 13,000km from new my mate bought it new,never been to track

hey chris , how you doing man , just wandering if you still have that uras cefiro front bar lying around ?

let me know asap man

thanks for your time

cheers anf

hey mate

Have you got the pc cable, map sensor, anti static strap, and all the gear you get when you buy a link ecu new?

  • 2 weeks later...
nismo 2way lsd centre 6 bolt suit s14,ect$500

6bolt drive shafts$100

25mm wheelworx 4 to 5 stud spacers $450 SOLD

r32 diff,cradle,shafts,all arms,$300

slip on 4 stud 5mm spacers $20SSOLD

link r20det ecu direct plug in $400

rb20det injectors $50SOLD

r32 left hand indicator $30SOLD

r32 left hand head light $50SOLD

r32 rb20det ecu $100SOLD

rb25 crank angle sensor $80

walker 2inch cat brand new $50

walker 2inch muffler brand new $50

RB25 cam covers$40

rear cannon 2inch inlet 4inch outlet brand new $50

r32 window switch ass$50

r32 rear hubs,rotors,calipers,ect $250

uras cefiro front bar $150

rb25 top and bottom half of intake manifold $50

rb20 cam cover $15

r32 left hand door black,with window$150

cefiro front seats $50

r31 s3 head lights$40SOLD

31 s3 bonnet silver$80SOLD

31 sedan doors silver,with widows $30each SOLD

31 s3 boot $50SOLD

s3 taillights $40SOLD

s3 tinted back $60SOLD

s3 front bar$40SOLD

brand new 2jz water pump$100SOLD

SA STRATHALBYN 0431 540 141

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...