Jump to content
SAU Community

Info Wanted

32gtrsteve

By 32gtrsteve,
in Tasmania

 Share

Recommended Posts

32gtrsteve Collaborator

32gtrsteve

Posted
  • Author
Posted

hey guys. I have just got my self a track car and turning it into a drift bus. I was just wondering whats the do and dont's to do to the car ?? As in what can't i do to the car. And do i have to join some kind of club or something ?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/327656-info-wanted/#findComment-5329761
Share on other sites
NICKCEFFY Enthusiast

NICKCEFFY

Posted
Posted (edited)

hey mate, you will need to be a member of a cams affiliated car club, e.g light car club, hobart sporting car club, and hold a cams license (both of which you can pay up and join on the drift days)

As for car/ driver prep, the basic safety requirements are:

helmet with appropriate AS safety rating

full length clothing

seat belts in good condition and having a AS rating or FIA rating

seat mounted properly

generally good car condition (no oil leaks, everything bolted in correctly especially batteries)

fire extinguisher is not a requirement these days but generally considered to be something to have, as long as its bolted in and using a metal bracket

there is no set limits on engine type in cars so you can inter breed between car makes

Jump onto the Hobart sporting car club website r Drifting Tasmania website both have generall requirement listings

edit: just lookign is that Sams old 32 you have??

any other questions sing out

Edited by NICKCEFFY
Link to comment
https://www.sau.com.au/forums/topic/327656-info-wanted/#findComment-5329870
Share on other sites
32gtrsteve Collaborator

32gtrsteve

Posted
  • Author
Posted
hey mate, you will need to be a member of a cams affiliated car club, e.g light car club, hobart sporting car club, and hold a cams license (both of which you can pay up and join on the drift days)

As for car/ driver prep, the basic safety requirements are:

helmet with appropriate AS safety rating

full length clothing

seat belts in good condition and having a AS rating or FIA rating

seat mounted properly

generally good car condition (no oil leaks, everything bolted in correctly especially batteries)

fire extinguisher is not a requirement these days but generally considered to be something to have, as long as its bolted in and using a metal bracket

there is no set limits on engine type in cars so you can inter breed between car makes

hey mate thats sweet as not to much to do. and yeah it is his old car. he used to drift it sweet so it cant be to bad of choice of car to have a go in and he was still running it with all electic's in it hahaha

thanks for the info man

Jump onto the Hobart sporting car club website r Drifting Tasmania website both have generall requirement listings

edit: just lookign is that Sams old 32 you have??

any other questions sing out

Link to comment
https://www.sau.com.au/forums/topic/327656-info-wanted/#findComment-5330097
Share on other sites
32gtrsteve Collaborator

32gtrsteve

Posted
  • Author
Posted

hey mate. thats sweet as not to much to do. and yeah it is his old car. he used to drift it sweet so it cant be to bad of choice of car to have a go in and he was still running it with all electic's in it hahaha

thanks for the info man

Link to comment
https://www.sau.com.au/forums/topic/327656-info-wanted/#findComment-5330417
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 Fuel Pump & Brakes after alarm swap

      By GTSBoy · Posted

      Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • GTSBoy
      After market rear camber arm adjustment

      By GTSBoy · Posted

      Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
×
×
  • Create New...