Jump to content
SAU Community

Recommended Posts

hey guys, i thought i'd just combine all of my threads into one.

all items are used:

TITANIUM 3 3/4" cat-back exhaust. weights less than 3kg!

$650

Enkei RP01 full set: 17x9 and 17x8 +38 offset - perfect for skyline with big brakes.

$450

Nismo FPR

$140

RARE Deatschwerks 740cc injectors (this is an EOI at this stage as i am building another motor which will need big injectors)

all paperwork is included. Ran on my car for a total of 2mins, they barely got wet and went straight back into their packaging.

$600 but can be fit to an rb25 fuel rail for $100 extra.

Standard injectors (67,000km on them)

$100 without rail, $200 with rail.

Reply here or send me a PM.

Cheers,

Joe

post-13452-1278481519_thumb.jpg

Edited by SECURITY
hey guys, i thought i'd just combine all of my threads into one.

all items are used:

TITANIUM 3 3/4" cat-back exhaust. weights less than 3kg!

$650

Enkei RP01 full set: 17x9 and 17x8 +38 offset - perfect for skyline with big brakes.

$450

Nismo FPR

$140

RARE Deatschwerks 740cc injectors (this is an EOI at this stage as i am building another motor which will need big injectors)

all paperwork is included. Ran on my car for a total of 2mins, they barely got wet and went straight back into their packaging.

$600 but can be fit to an rb25 fuel rail for $100 extra.

Standard injectors (67,000km on them)

$100 without rail, $200 with rail.

Reply here or send me a PM.

Cheers,

Joe

Hi, I presume the exhaust is for R33GTST, I am looking for a GTR33 4" TiTanium for track duty

0433 878905 Melb

not much, for $450 for RP01's i wouldnt expect any!!

i can send you to a mate of mine for some cheap 17's if in sydney.

  • 4 weeks later...
hey mate, not too interested in splitting up the set unless i had a buyer for the others.

if you find a buyer for the others - that'd make us both very happy!

drop me a sms if you do: 0416271173

looks like one of the 9" are cracked. so im going to let these go super cheap. $250 for all 4. im pretty sure they can be repaired.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Did you take the MX5 for a Blat around the Track at all?
    • LOL, "they said it might be slippery"..... 30 seconds in your off, 60 seconds in white twin backs into the corner That new track looks good, and the Datsun was chopping cars quite nicely     
    • I'll get one of these also just for giggles
    • I bought 6 new spark plugs to compare readings. They will be here tomorrow and ill see if meter is far off if it all. I know one is at least reading 0 so its best replace all anyway if one is bad, from experience. I still have to test the harness just to be sure its not a double issue and I waste my time haha-the old plugs are iridium I always thought those lasted more than 50,000 km.
    • If you take the top half of the intake off you can unbolt the flap off the shaft and leave the shaft in there blocking the hole. Then you can remove the little vacuum canister off from under the manifold and get a spare vacuum line to run to the ECU. I can take some photos of it later. Probably best to get the vacuum source to the ECU sorted first though. Mine all worked mint with the base map from the GTT an I've pretty much let the closed loop sort the fueling and took 1 degree out of the whole timing map.
×
×
  • Create New...