Jump to content
SAU Community

Recommended Posts

Got a few random bits lying around up for grabs. Prices firm.

1) Custom Hand Made Catch Can. $50

Not the sexiest looking thing but it was made specially to have 2 inlets, internal baffles running down to drop the oil and back then up for venting. Comes with breather and pirtek fittings and bits of hose. Mounting plate to sit on back of firewall with factory screw location.

2) Radiator Deflector $45

Bought from Just Jap and was fitted to S1 R33. A little out of shape as I had to bend it to fit my rare aftermarket grill.

3) Whiteline Rear Camber Kit KCA347 $80

Brand new. Never fitted. Comes with instructions, grease and 4 bushes.

4) Turbo Tech Bleed Valve $10

Bought but never fitted. It's missing a spring and ball?

5) Steering wheel. $45

Brand new. Never Used. 32 cm wide. Faux carbon look.

6) S2 Wing. $15

Resprayed in 2pak Black (non met) but got scratched in storage. Details as per pics.

7) Sunroof Glass with lining and bits. $30

Has some rust but easily fixed for a spare as these are hard to come by.

Contact Justin 0406 370 292

Please SMS/call for quick response as hardly check site since car sold.

post-19529-1278828092_thumb.jpg

post-19529-1278828131_thumb.jpg

post-19529-1278828197_thumb.jpg

post-19529-1278828233_thumb.jpg

post-19529-1278828274_thumb.jpg

post-19529-1278828408_thumb.jpg

post-19529-1278828458_thumb.jpg

post-19529-1278828484_thumb.jpg

post-19529-1278828535_thumb.jpg

post-19529-1278828612_thumb.jpg

post-19529-1278828651_thumb.jpg

Do you know how much camber the kit gives? Does it have an install guide and is it DIY to remove the old and in the new?

Hey there,

Sorry for late reply as I don't check site too often. If you need quick reply, call or SMS. The kit comes with instructions and is pretty straight forward. A single kit will you .75 reduction in camber if you do the inner and outer upper control and radius arm.

Hope this helps.

Cheers,

Justin

0406 370 292

Hey there,

Yup, still have it. Give me a call if you want to come buy and pick up. Best call as I haven't checked the site till now since posting the ad. Location is in Kensington

Cheers!

J

0406 370 292

Got a few random bits lying around up for grabs. Prices firm.

1) Custom Hand Made Catch Can. $50

Not the sexiest looking thing but it was made specially to have 2 inlets, internal baffles running down to drop the oil and back then up for venting. Comes with breather and pirtek fittings and bits of hose. Mounting plate to sit on back of firewall with factory screw location.

2) Radiator Deflector $45

Bought from Just Jap and was fitted to S1 R33. A little out of shape as I had to bend it to fit my rare aftermarket grill.

3) Whiteline Rear Camber Kit KCA347 $80

Brand new. Never fitted. Comes with instructions, grease and 4 bushes.

4) Turbo Tech Bleed Valve $10

Bought but never fitted. It's missing a spring and ball?

5) Steering wheel. $45

Brand new. Never Used. 32 cm wide. Faux carbon look.

6) S2 Wing. $15

Resprayed in 2pak Black (non met) but got scratched in storage. Details as per pics.

7) Sunroof Glass with lining and bits. $30

Has some rust but easily fixed for a spare as these are hard to come by.

Contact Justin 0406 370 292

Please SMS/call for quick response as hardly check site since car sold.

Bushes sold. Everything else still available.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Need to see other side of PCB in that area...ie; I don't see any thru-hole mounting, just soldered vias (smd zeners in SOT23 have 3 legs but only 2 are used, as reflected by PCB tracks)
    • 4 to 5 is fine. It will be slow, but that's better than blowing turbos. I don't have a PS pump idle up solenoid on my car, because... I think when we put the Neo in we retained my R32 lines. But.... From inspecton of the R34 vacuum hose diagram, you can see that the solenoid needs to be connected to the turbo inlet as source of clean air) and the plenum (as source of vacuum - which is the place for the air to flow to to cause the idle to increase). So 3 to 1 is VERY WRONG. 3 should go to either the turbo inlet, or the plenum. Follow the other hose from the PS solenoid and if it goes to the plenum, then your 3 goes to 2 2 would also serve as a bleed port for a boost solenoid.
    • Pull them out and pull more apart. You can't do shit with them still bolted to the floor of the car.
    • Yes it is. ZD1 is on the other side of the board. Where ZD1 is marked is clearly opposite a 2 pin device. Our 3 pin device here is not a ZD.
    • Alright, a little update on this... I called Fulcrum, who used to be the distributor in Australia. No Bueno, they don't service them anymore.  Called shock works, who don't service them but offered to dyno the shocks for performance, and suggested DNA in Sydney might service them.  Called DNA, who also do not service them and basically said they try to steer customers away from tein for this exact reason these days- there is just no support for them anymore apparently.  Both SW and DNA said they are a not necessarily a bad product, but they just don't service the brand or know anyone who does service the brand anymore.  So... I could keep calling around but at this point I think I'll probably just spring for the shockworks product, unless anyone here knows anything.  Cheers 🍻 
×
×
  • Create New...