Jump to content
SAU Community

Its Been A Long Time Since I Was Here. Have Another 32 Questions On Upgrades Please Help


Recommended Posts

Hello

It has been a while since I posted on here, over a year. I have read the posts but still need some help. Please help. I live in Japan, American, so not Australia, but dont mind buying parts from Australian stores.

I have a new 1992 R32 GTS-T. This time its a manual. My first car died. I am taking parts off of it. I am going to take the RB25 turbo with the HKS aculator and put it onto the new car.

SO far the car has a 3 inch cat back exhaust, split front pipe, stock cat, Apexi air intake and that is all. I am going to add the RB25 turbo as I mentioned. Should I keep the HKS aculator on it or put the RB20 one on?

I am getting a inter cooler also. Will used ones be fine such as ones from Blitz or Arc or used GTR ones? I can find cheap used inter-coolers here for about 100 dollars.

My goal is 300 hp but now I am aiming for 250 hp to start. Should I replace the fuel pump too since I am adding the turbo and inter cooler? If so than I will buy a after market one rated higher so when I start the big mods I will have it.

What else should I add now?

Are the Emanges' still a good option for tuning later?

Help please

What is the HKS actuator set to? If you still have a stock ECU, it will probably go into Rich & Retard mode (R&R) if it's set to 12psi or higher.

Change pump for peace of mind, it's what 18 years old now, no guarantee it will take kindly to the extra power.

Since you are aiming for 250hp, the stock intercooler will do, but at 300hp, you will need a better one, used intercoolers should be fine as long as the fins aren't damaged and you give it a good cleanout. At 300hp even the R34 stock sidemount is a decent upgrade to support that power, but no more.

What is the HKS actuator set to? If you still have a stock ECU, it will probably go into Rich & Retard mode (R&R) if it's set to 12psi or higher.

Change pump for peace of mind, it's what 18 years old now, no guarantee it will take kindly to the extra power.

Since you are aiming for 250hp, the stock intercooler will do, but at 300hp, you will need a better one, used intercoolers should be fine as long as the fins aren't damaged and you give it a good cleanout. At 300hp even the R34 stock sidemount is a decent upgrade to support that power, but no more.

Thanks

The ECU is stock. I am not sure what it is set to. The adjusting screw is at the opposite end 80% from the starting point.

So should I switch to the RB 20 aculator?

How do you clean out a inter cooler?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I can ship Nismo floor mats to you: https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34?_pos=1&_sid=9278c1467&_ss=r  
    • Here's the link: https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6642/misc/G49?frame_no=WGNC34-137122 What you think about it? The same product i found on nengun: https://www.nengun.com/oem/parts/40567/MiPwn5qAMfCfmpxHNDnwn5q9MDAx8J-QiW9sZC1qcC0xMTAtRzQ5LS0wMDE/Floor+Carpet+%2F+Mat+2/0688339eba149c19 Bot i have spoken to 😅 ensured me, that mats are 100% original, oem product. I have my doubts. I also heard what you mentioned, that nengun often offers items that are actual not available... On the other hand mats i found on japanese yahoo or ebay are in poor condition and still quite expensive so i'd rather wait for some better offers. My location - Poland. We literaly don't have ANY market for used Stagea parts so need to search outside Europe.
    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
×
×
  • Create New...