Jump to content
SAU Community

Recommended Posts

RB26 specs

JE forged pistons (im not sure how long they have been in the motor, they look fairly new and in goog condition)

Std Rods

Std Crank

N1 oil pump (Brand new only just fitted to the block)

GMP water pump (Brand new)

I would recommend that the person that buys it, replaces the rod and

main bearings for piece of mind, asking $2000 (neg) , if you have any questions send me a pm

i also have std RB26 manifolds for sale, std 32 GTR AFM's, a Dash, and all the crap under the dash, if your after something

send me a PM i might have it laying around.

I have the following items that have been removed from my R32 GTR for sale:

1 x Passenger side seat and rail ($230)

1 x Drivers side seat and rail ($150 seat has a tear)

2 x Door cards (both driver and passenger sides $100 each)

1 x Roof trim (needs to be cleaned $80)

1 x Hicas pump (was working before it was removed $100)

1 x Standard fuel tank (no fuel pump $150)

1 x Walbro 255 LPH/550hp fuel pump (has only been used to prime fuel rail vehicle was never fired with this fuel pump $120)

1 x GTR wing (needs to be repainted $100)

1 x ABS unit (needs a clean was working before it was removed $250)

1 x Standard radiator (has a few bent fins $70)

6 x Standard 440cc injectors ($300)

2 x Standard R32 Turbos ($400)

1 x Front bar (slight damage, front bar mounts fine, the lip just hangs down a little in the centre, its repairable $150)

any inspection welcome, all prices negotiable, im located in Banyo, Brisbane

pm me any questions

hey mate are the injectors still for sale can i come have a look at them cant u txt me ur number to 0435713185 or pm me ur number so i can call u asap thanks

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What's on the front of their building?
    • Jax Tyres Smithfeild Ive gone there a few time, well for tyres. on my 3rd visit I spoke to the dude and told how i just got slugged for rotors, brakes ect. His reply was golden; have you read whats on the front of the building. Never forgot it.       before picture, good friend got all these goodies installed.  Well time to study, servicing, maintenance all before this weekend driving lesson.  
    • Hello, first of, I’ve looked at many threads on this code but none have helped me, if you know one that will help me feel free to post a link.   Now to my problem. Recently I was driving and noticed the check engine light came on. I went home and did the test to see what code it gave. I got the 21 code but everything seems fine with the car, no misfire, idle is good, acceleration is the same as when I bought it. I mean no signs of obvious failure. If no misfire is happening I can rule out the coil packs right? Which is about 98% of posts saying it is. If anyone has had this happen and found the issues let me know please. No other lights are on.   The car WAS due for an oil change. I since then changed it so idk if that triggers code 21. Either way it hasn’t turned off.
    • Your both right, it may hold a bit longer then.  Soon I need to change the synchros, should I fit the billet plate while I'm at it? Or just a waste of money?
    • Some of the east coast US Stagea got together this past weekend at Lime Rock Park in CT for Grid Life Circuit Legends. This is probably my favorite pic of the shoot with @Morgan.Mundahl on IG. Hope we get more stags out next year! i think I spotted 5 other than my own at the event. 
×
×
  • Create New...