Jump to content
SAU Community

Recommended Posts

Just installed an amp and I'm having amplifier engine noise problems. I've done searches and will try and figure it out but I was just wanting to confirm which side of the vehicle is best for running the RCAs?

I've got them down the passenger side at the moment (cleverly running right past the ECU!), is this the best way?

Also, I've got nice heavy 4GA power/ground lines on the amp, do I need to mess with the wiring on the pioneer head unit? (I'm thinking not?)

Car is a 33 gtst.

Cheers,

John

Link to comment
https://www.sau.com.au/forums/topic/33358-quick-amp-question/
Share on other sites

G'day John,

Damn these R33 GTS't are so bad for engine whine :) I've got the same problem....

I reduced mine by running the RCA's as far away from any power source as I could. For me that meant running the RCA's up the middle of the car. Not sure if this is the best but......

I also put a power filter on the head uint which didn't do much, so it must be getting into the low level stuff feeding the amp.

I also found that if you earth everthing really well it seems to help reduce the whine.

Anyone else had much luck ??

J

I ran mine down the passenger side, have had no problems. Where did you mount the amp and where did you ground it to ?

At the moment the amp is just screwed into the base shelf of the boot (carpeted MDF). It's grounded (4GA) at the same point the battery is grounded, and the power (4GA) comes straight from the battery terminal via a fuse.

Don't ground it to the same one as the battery. This can cause problems, also what brand amp are you using? some of the cheaper kind and really bad for nosie. A friend of mine had a cheap amp with a really bad whine through it, then he upgraded to a decent amp, noise gone, and we didn't change the wiring at all.

I'll try moving the ground and see what happens.

The amp is one of those Jaycar AA-4035 4x100W rms amps (being discontinued and on sale at the moment for anyone who's interested). A cheap amp compared to some brands but they're supposed to be ok as far as I know...

Anyone else out there with one of these amps who's not having problems and can let me know how they've wired it up?

i just recently did an instal (which amp for my 2x 12"subs post). Mine sounds awsome, no whining noise what so ever,and HUGE bass & clarity, I'm running Rockford Fosgate head unit, earthquake 6" splits front Via old Sony EMX700 2 channel amp(soon to be upgraded to Soundstream RUB 300-2), rear stockie clarion paper cones running off head unit, and 2 x 12" orion subs off a Soundstream RUB500-2 2 channel amp. Both amps are in the boot right next to the battery, RCA leads I ran down both sides of the car, passenger side for front splits amp and drivers side for sub amp. remote wire for both amps down passager side, LH split speaker wire down passanger side to amp, RH split speaker wire down drivers side to amp. Earth to car body, power through fuse then to a slit block to provide power to both amps.

May or maynot be worth mentioning that my R33 came with a top quality earthing kit throughout the car, wheather or not this makes a diference or not im not sure?

Seems to have sorted itself out, I just cable tied the rcas and moved things around a bit and I can't hear it anymore.

I've not had car sound running off a seperate amp before, speakers sound amazing. The amp in the Pioneer 6450 headunit was apparently really really bad at any kind of volume, and had me wondering about my shiny new JL audio 6x9s. (The inbuilt amp in my old bottom of the line sony head unit seemed to pump out much cleaner power than the pioneer)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...