Jump to content
SAU Community

Sa: Street/track Build Rego'd 323 '86 Bay Side Blue

BoostdR
 Share

Recommended Posts

BoostdR Mentor

BoostdR

Posted
Posted

I have finally have my GTR on the road again so have no need for my temp track car. I has been a joy to drive and put many other cars to shame. It has been resprayed in 2 Pac Nissan R34 GTR Bayside blue by Joe at Pro Finish Custom Painting, unfortunately I have scratched the rear bumper, bonnet, drivers guard and front bumper. Bad enough that it should be painted over. There are no dents in the pannels however just scratches. There is much good news about this car though. The motor was rebuild at NISSPEED 6months ago and has the following specs:

Full Blue print assembly

Balanced (pistons, rods, crank, flywheel and clucth, harmonic)

Forged Wiesco pistons (1.5mm over for more capacity)

Forged Eagle Rods ARP cap bolts

NDC bearings

New Lifters

Gold 2 pac rocker cover

ARP head studs

Adjustable cam gears

Steam pipe 4-1 exhaust manifold

Haltech F9 ECU

OEM Ignition (knock feedback and retard)

EVO 9 injectors

Walbrow 255 intank pump

Custom Modified OEM side facing Plenum- This setup with the intercooler provides a very short and direct inlet track for minimal lag and very crisp trootle response.

Water to Air Long Flow Intercooler with Alloy radiator and electronic pump also remote alloy water filler

R33 GTST Series 2 Turbo (ceramic turbine wheel, Carbon composite Compressor-very responsive)

Heavy Duty Organic Clucth (holds well and is kinder on the gearbox)

Gearbox from a 626(pretty sure internals are no stronger but ratio's are better for the track) filled with redline Shock proof oil.

ARD Approved Winged racing seats (ADR forms in the glove box)

Full 3" Exhaust with Magnaflow resi and Muffler(not to loud, just right)

Custom cold air induction and Pod Filter

Front Mount Oil cooler

Familia rear hatch with dual spoilers

Koni damper adj suspension

Adj camber kit

Polished Performance 5 Spoke rims(needs 4 new tyres)

Guages mounted above stereo in dash (boost, oil pressure, oil temp) also led illuminated switches for ACC and ON

Pivot Starter button(lights up blue)

Slotted and Dimpled gold pasivated front discs

Momo millenium style steering wheel (very small)

Power steering

Running and Tuned on E85(99c at litre from seaton united) also has a tune for BP98

Made 207kw and 420nm (at the wheels) before the plenum was modified. Dyno sheets will come with the car. I would expect her to have even more torque now. Cam gears have yet to be played with.

Absolutley Insane and light little machine. Handling in extremmely impressive. Car has been set for slight over steer and 4mm tow out at the front gives nice responsive steering...although on the street bump steer is slightly noticable.

She has been sitting for a coulpe of months and I would love to keep her but I need some cash to fund my other track car. It does need some love and tlc, however only cosmetic. The money, engineering and mods have been spent on all the right things to ensure this is a rewarding and reliable package for years to come.

It needs the following to bring her up to spec:

New set of semi slick tyres (kuhmo KU36)

Paint over scratches( Pro Finish Custom painting- Joe)

add some rego

Neaten up Haltech wiring

also recommend a roll cage

Collinsgrove Hill Climb, Old Motor

Completed the hillcimb as fast as an EVO 10. 3#sec zone. can't remember the exact time

323 At Mallala

Spents well over $10,000

asking around $5,000

Contact me on

0413023669

or SMS that you have sent a PM

Regards,

Matt

Will post up some pics when I get home.

  • 2 months later...
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • GTSBoy
      R32 GTS (RB20DE) Injectors Replacement

      By GTSBoy · Posted

      No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • codygrimm27
      Can you mount the ATTESA pump in other locations?

      By codygrimm27 · Posted

      Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      You think its the AFM? I know its a common issues on R32s. I find it coincidental how this issue raised right after cleaning the fuel system. As everything except the fuel system was fine before. I tried running it with the IACV unplugged but did not notice a difference and still stalled. However, the RPM gauge is not in the cluster right now, so I will need to connect the laptop again and use Nistune to check the RPM. I will check this weekend.
×
×
  • Create New...