Jump to content
SAU Community

'00 Pulsar Sedan (nsw) - Turbo, Engineered.

gregor
 Share

Recommended Posts

gregor Rising Star

gregor

Posted
Posted (edited)

FS: 2000 N16 Pulsar Sedan - Turbo (QG18DE+T) - NSW

Item:
Dec 2000 built N16 sedan ST, 1.8L manual with a +T turbo conversion

Location:
Central Coast NSW

Website:
, other forums.

Item Condition:
Very good

Reason for selling:
Have a new project

Price and price conditions:
$11,000 ono.

Extra Info:
I've owned the car since it was around 18 months old, stock standard and I've put all bar 10-15k of the km's on it. It is always garaged and you can see it in the condition of the car.

  • Engineered in NSW

  • Has 126k on it

  • Has May 2010 rego

  • Has a long list of modifications including aftermarket sound system, bodykit, mags, lowered suspension, rear sway bar and front strut brace, turbo conversion putting out 140kw at the fronts from a TD04L @ 10 psi, decompressed engine to approx 8.2:1, upgraded clutch.

  • Has recently had the head gasket replaced and the engine inspected, cleaned and decompressed.

  • I've got receipts for most of the work and I've spent much more than what I'm asking on modifications alone.

  • The car has never been listed as a write off and hasn't been in any accidents since I've had it. There's no evidence or any accident or hail damage prior to my purchase.

The car drives well and needs no work done, just buy and enjoy it. It's a very responsive car and lots of fun. There aren't many cars around offering the mix of performance, condition and age in the same price range. It will be missed but I don't need 2 cars for the small amount of driving im doing these days.

It will pass any mechanic's inspection and i'm happy to have it looked at by your mechanic if its not rediculously far away and obviously it's at your cost.

If you want any more information PM me or check the car out on carsales and send me an enquiry through there if you don't have enough posts to send a PM.

SWAPS:
I would prefer cash but I will consider some swaps if its something suitable for a track car. I don't want it if its auto, NA, in poor condition, front wheel drive, commodore/falcon, s13 silvia, onevia/sil80/any other car that started life as 2 cars.

Models i would consider would be 180sx, s14, r32, r33, FC RX7. The car would need to be worth a similar amount of cash or you'd need to be prepared to make up the difference in cash. I've already dropped the price and I think it's at a reasonable level so if you're thinking about offering me a direct swap on something worth 7k don't bother.

pb200107large.jpg

pb200104large.jpg

pb200111large.jpg

Edited by gregor
gregor Rising Star

gregor

Posted
  • Author
Posted

pb200114large.jpg

Theres more pics in my carsales ad, just click the carsales link in my first post.

I'll be at the texikhana event tomorrow with a different car but if any sydney people want to check this out in person i can bring it along too (but i wont be entering it). Post here or call/SMS me on 0410313104 if you want a better look.

gregor Rising Star

gregor

Posted
  • Author
Posted

May also consider a swap for a late model road bike (would need to be lams legal). Depending on the model I might need some cash my way though.

The car is on eBay as well now.

gregor Rising Star

gregor

Posted
  • Author
Posted

ok guys ive had a bit of a low ball offer but im considering it so for this week only i'll let it go for $8500. If you've been waiting for a price drop now's the time to speak up - PM or give me a call.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
    • GTSBoy
      DeAgostini 1/8 scale BNR32 Nissan Skyline GT-R Nismo

      By GTSBoy · Posted

      That's hilariously putrid!
×
×
  • Create New...