Jump to content
SAU Community

Info

Dasher220
 Share

Recommended Posts

Dasher220 Newbie

Dasher220

Posted
Posted

Hey guys this is my very first post so please dont flame me,

anyways i currently own a 94 Toyota Supra SZ i purchased about 6 months ago. This car has been very true to me and is still a pleasure to drive. However since the purchase i have been able to come in possession of a bit more money and am looking to upgrade. This is purely because my decision to buy this particular Supra was very rushed and made quite ignorantly without any contextual knowledge towards the model itself. After purchasing the car and reading up a bit more, i became aware of how hasty my transaction had been. I was particularly annoyed to find out about the SZ-R model which features larger brakes and a 6 speed gearbox (there are also other upgrades as im sure most of you are aware of but they were the main two which stood out to me the most). Now that im deciding to sell the car, i am very hesitant about purchasing another without a full understanding of it. One car i am considering is the R34-25GT. I am completely determined to buy a car which pleases me in all ways and without regrets. For this reason i have had several questions, most of which have already been answered by the resources available on this site (very helpful i might add). I do however still have a couple more in regards to variants and i want to be completely informed before i commit to a sale. I was wandering if like the NA Supra, does the Skyline have a particular upgraded model (like the SZ-R) that has some additional factory extras. Furthermore, was there ever a refurbishment of the R34 during its production, that is, is there a Series 1 and Series 2 model?

Thanks for all your help guys and sorry if i kept comparing the Skyline to the Supra, but its the only way i could covey what im trying to ask.

Link to comment
https://www.sau.com.au/forums/topic/334419-info/
Share on other sites
mad082 Grand Master

mad082

Posted
Posted

yes there is a series 1 and 2 r34 (but the differences are minimal. no difference in performance, just cosmetic). there isn't really any model variations of the turbo versions of the gt-t. some may have a few different options, but that simply comes down to what options the original owner wanted

Link to comment
https://www.sau.com.au/forums/topic/334419-info/#findComment-5419074
Share on other sites
Dasher220 Newbie

Dasher220

Posted
  • Author
Posted
yes there is a series 1 and 2 r34 (but the differences are minimal. no difference in performance, just cosmetic). there isn't really any model variations of the turbo versions of the gt-t. some may have a few different options, but that simply comes down to what options the original owner wanted

What year was the Series 2 released, and was there any variations of the na GT version? thanks for the help

Link to comment
https://www.sau.com.au/forums/topic/334419-info/#findComment-5419386
Share on other sites
.:: GimpS-R34 ::. Grand Master

.:: GimpS-R34 ::.

Posted
Posted (edited)

series 2 was released 2000... there are different models of N/A.. there is GT, GT-X, GT-V.. also there is the GT-4.. which is a 4WD version.. i believe there are a couple of rb20 motors in aus.. you don't want them LOL

if you search a bit mate you will find all the info you need.. just do some google, SAU searches and learn what you need.. it's not hard..

Edited by .:: GimpS-R34 ::.
Link to comment
https://www.sau.com.au/forums/topic/334419-info/#findComment-5419403
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...