Jump to content
SAU Community

1995 R33 Gtr V-spec

JMW

By JMW,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

JMW Mentor

JMW

Posted
Posted

Well time has come to persue a different direction, so my prized GTR is going up for sale. Well modified but not over the top, very clean and presentable, excellent interior condition, always serviced regularly, never see the track.

Vehicle was in storage for approximately 5 years before i purchased it last year. Previous to being put into storage it had a full engine rebuild by Rhemac here in Adelaide using both after market and genuine Nissan parts. Gearbox has also been rebuilt but details of this i am unsure of, thrust bearing is a little noisey but changes gears fine. Coilovers have a slight knock in the rear but still work quite well.

This car has had a long history in Adelaide, previously belonging to a member of IBLIS car club, and being one of the first modified GTR's in Adelaide. Vehicle was purchased from a HKS Dealer mechanic originally, so there are a few mysteries with it.

Car has made 358awkw at Autosalon in adelaide on Graham West's Dyno at 1.5bar

Modifications as listed below, probably missed a few but listed most of what i could think of.

Apexi Power FC Pro (very rare)

HKS CAMP and Panasonic display screen

K&N Extreme top filters,

HKS KANSAI 80A/F Meter (Z32),

HKS GT2530 Turbine, HKS GT Manifold,

NISMO Turbo Pipe, NISMO Front Pipe,

Apexi Dual N1 exhaust,

HKS 1.2mm Metal Head Gasket,

HKS Engine Gasket Kit,

HKS Step 2 Camshaft (in264/out264),

HKS Cam Pulley Adjusters,

TOMEI Valve Springs,

NISMO N1 Pistons (0.5 larger),

NISMO FUEL PUMP,

Siemens Deka 750cc injectors,

CUSCO Oil Catch Can,

HKS EVC III Boost Controller,

HKS Oil Cooler kit with new Earls core

HKS Remote Oil Filter Kit,

HKS Intercooler

HKS Intercooler Piping,

YOSHIO FACTORY 3 Core Radiator,

Greddy radiator deflector

NISMO Thermostat,

NISMO Twin Plate Clutch,

NISMO Pivot Stud,

HKS Kansai Attessa Conroller,

OHLINS Racing Suspension,

NISMO Circuit Link & Bushes,

NISMO Engine Mounts,

HKS Kansai Alloy Suspension Links,

Work Emotion XD-9's 18x10 +15,

Yokahama S Drive 265/35/18,

NISMO 320 Speedo Meter (white),

NISMO Center Meter (white),

HKS Electronic Torque Controller,

HKS Drag Controller,

APEX Boost Meter,

APEX Exhaust Temp Meter (missing sender)

TRUST Pillar Mount,

APEX ECV (not fitted but will include)

CUSCO Strut brace,

JUN style front lip

98 GTR Xenon Headlights,

N1 Intercooler Duct,

N1 Bonnet Lip,

GANADOR Electric Mirrors,

NISMO GT500 Urathane gear knob

MOMO wheel,

NISMO Rad cap,

CUSCO Master Brake Stopper,

CUSCO Steering Shaft Extension,

HKS Type 0 T/Timer

ALPINE CDE-114BTi head unit (only just fitted this week)

ALPINE 2 way Splits (Front/Rear)

BLITZ Blow Off Valves (Removed),

NISMO Circuit Link Castor Rods......

PM or message/phone 0413697162

post-53780-1284692216_thumb.jpg

post-53780-1284692247_thumb.jpg

post-53780-1284692286_thumb.jpg

post-53780-1284692328_thumb.jpg

post-53780-1284692357_thumb.jpg

post-53780-1284692407_thumb.jpg

post-53780-1284692489_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/337157-1995-r33-gtr-v-spec/
Share on other sites
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Chupapy
      Coolant leak?

      By Chupapy · Posted

      Is it alright to top up with just another green coolant?
    • Songo
      New kid on the block

      By Songo · Posted

      thanks GTSboy. My confusion at the moment is i am trying to locate the ignition, ECU battery power and the ECU negative The closest thing i can find is the for the S15 on Page 8 of the Wiring Specialties web page https://drive.google.com/file/d/0B9F33_M_GgENQnZ6STMxVmVNd1E/view?resourcekey=0-eZ4nNRwRoqa1qvKlWWHm8A I cannot find the same diagram for the R33 RB25DET Series 2 dash plug pin out.... Do you know what the Pins? or know where i can find the same pinout diagram for the RB dash plug? Thanks for the advice on the box... i like a 6 speed so might be on the lookout or the box now.. a topic of discussion for another post...
    • Chupapy
      Coolant leak?

      By Chupapy · Posted

      Will have a look at that. I cant see any leaks 
    • GTSBoy
      Coolant leak?

      By GTSBoy · Posted

      Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
×
×
  • Create New...