Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
6bolt drive shafts $100

s14 nismo 2way lsd centre,with 6 bolt half shafts $400

5 bolt drive shafts $80

r32 gtst rear 5stud hubs,brakes,hand brake set up $250

r32 rear cradle with all arms $100

r32 lsd diff $100

r32 clutch pedal, clutch master cylinder,slave cylinder,and all the lines between $200

r32 manual brake pedal $40

r32 brake booster and master cylinder$80

r32 excelerator pedal and cable $40

r32 charcol canister$20

rb20 top timeing belt cover $10

r32 hand brake $40

r32 heater core and evaporator assbly $100

brand new walker rear cannon 2ich inlet 4ich out let $50

brand new walker cat 2ich in 2ich out $50

brand new walker middle muffler 2inch in 2ich out $50

rb25 cam covers$40

rb25 coilpack cover$10

rb25 top timeing belt cover$10

r32 climate control unit$50

r32 drivers side window switch assmbly $50

rb25 crank angle sensor$50

rb25 intake manifold,bare top and bottom half$40

pioneer mini disc player$40

rb20 engine,coilpack,loom$150

r32 steering colum with ignition barrel and key$50

r32 fiber glass rear pods,small crak in one$40

rb20 hicus power steering pump $40

rb20 afm green label $50

r32 front wiper arms$15 for the pair

r32 front rotors $30pair

rb20 egine mounts$30pair

rb20 coil pack brakets$20

rb20 back plate,that goes between box and motor$10

rb20 red top cam covers and top timeing belt cover painted red with the lines sanded back$60

located strathalbyn SA 0431 540 141

can post some of the small items

2way lsd sold

r32 brake booster and master cylinder$80 sold

r32 hand brake $40 sold

r32 climate control unit$50 sold

rb20 red top cam covers and top timeing belt cover painted red with the lines sanded back$60sold

throw me offers on rest,postage avaliable at buyers cost

  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...