Jump to content
SAU Community

Grounding Kits On Rb25dets?

TUF250

By TUF250,
in General Maintenance

 Share

Recommended Posts

TUF250 Proficient

TUF250

Posted
Posted

Hi all,

I had some success in removing some idle problems with my old XR8 by installing a grounding kit. basically making a few heavy duty earth straps. This was a common fix for a common problem in this particular car.

Can the same thing be said for R33 rb25dets? is there anything to be gained from the kit or are they earthed well from the factory? I had an extra earth strap put in when Ihad the fuel pump changed.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/338180-grounding-kits-on-rb25dets/
Share on other sites
t_revz Grand Master

t_revz

Posted
Posted

batt cables are quite small and dont look big enough but they seem to work. when batteries are mounted in the boot its a fairly small cable travelling that distance but good reduction drive starter motor doesnt need much power...if you already have upgraded the earth and dont have any dramas then i wouldnt worry. i bumped all my cables up to help crank faster and for big stezza. i had to redo batt cables in my commondore back in the day as it had so many electrical gremlins.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
×
×
  • Create New...