Jump to content
SAU Community

Recommended Posts

its has a full custom widebody kit (was not cheap) custom made by Adrenaline

front guards r about 9 inch wide

rear guards r about 14+ inch wide

has huge veilside deep dish rims

front 18x11......... with 245 tyres stretched on

rear 18x13.5.......... with 285 tyre stretched on

>>>>teins coilovers

>>>2way nismo diff

monza race seat

700hp fuel pump

tecktom pigyback ecu

dash has been all re done in greedy autometer and tommi gauges

full custom dash

has digital speedo as well

stripped seats only one bucket seat

this is a great car u have to c it to believe it was set up 4a rb25/30 and 25box.all it realy needs is a motor and box and your away the car is

registrable it use to be on road.

im sure it has lots more stuff on it just cant think atm.

FRESH FORD BREEZE GT PAINT.. TURNS 3 DIFFERENT GREENS

.

!!!!!! ROLLING SHELL !!!!!

PAINT LOOKS LIGHTER IN PERSON AND IS PEARL 3 DIFFERENT GREENS..

HAVE ALL PLATES AND MOD PLATE FOR RB25

0430828859... $9000 cash for shell as in pics... 11g for swaps

gold coast qld

will be 15k once i get a motor...

post-68974-1285997993_thumb.jpg

post-68974-1285998012_thumb.jpg

post-68974-1285998073_thumb.jpg

post-68974-1285998097_thumb.jpg

post-68974-1285998132_thumb.jpg

post-68974-1285998157_thumb.jpg

post-68974-1285998182_thumb.jpg

post-68974-1285998213_thumb.jpg

post-68974-1285998238_thumb.jpg

post-68974-1285998272_thumb.jpg

post-68974-1285998289_thumb.jpg

supply and demand says he can charge what ever he wants.

Try and find another car like this =P

plus a paint job isnt cheap.

good luck with sale mate.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...