Jump to content
SAU Community

Recommended Posts

hey guys selling up my beloved 6 to upgrade now to a 9 or 10 on lease

so no swaps at all unless u have a 9 or 10 and i can part trade and give cash. but thats all ony an evo 9 or 10

it is 1999 mitsubishi evo 6

white in colour

2.0l turbo

pod filter

turbo timer

mp3 cd player (have original double din cd/mini disc player that car came with)

drift 52mm digital boost gauge (intalled in single din above cd player)

carbon fibre bonnet with bonnet pins

cat back exhaust

Plazmaman specR hotside intercooler pipe with turbo outlet pipe.

walbro fuel pump upgrade

recaro interior in perfect condition no wear at all which is rare, just go and look at alot of other evo6 at the importers.

Greddy profec II boost controller running 17psi low 20high.

car puts out 186.9 kw at all wheels.

great fun car, plenty of power, superb handling.

plenty more in it, just add a short intake pipe and front pipe and should see over 200.

1piece headlight conversion. ( have stock headlights to go with car too)

brand new rear tyres, plenty tread fronts

brand new front rotors and pads

rego until August 2011.

i think that is all.

located in newcastle nsw

after around 18k ono for it

pm me if needed

cheers kyle

4685148272_9d1065f58b.jpg

4684514483_4161094a8c.jpg

4685148338_74d2c89ec4.jpg

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/342331-evo-6-mitsubishi/
Share on other sites

hey guys selling up my beloved 6 to upgrade now to a 9 or 10 on lease

so no swaps at all unless u have a 9 or 10 and i can part trade and give cash. but thats all ony an evo 9 or 10

it is 1999 mitsubishi evo 6

white in colour

2.0l turbo

pod filter

turbo timer

mp3 cd player (have original double din cd/mini disc player that car came with)

drift 52mm digital boost gauge (intalled in single din above cd player)

carbon fibre bonnet with bonnet pins

cat back exhaust

Plazmaman specR hotside intercooler pipe with turbo outlet pipe.

walbro fuel pump upgrade

recaro interior in perfect condition no wear at all which is rare, just go and look at alot of other evo6 at the importers.

Greddy profec II boost controller running 17psi low 20high.

car puts out 186.9 kw at all wheels.

great fun car, plenty of power, superb handling.

plenty more in it, just add a short intake pipe and front pipe and should see over 200.

1piece headlight conversion. ( have stock headlights to go with car too)

brand new rear tyres, plenty tread fronts

brand new front rotors and pads

rego until August 2011.

i think that is all.

located in newcastle nsw

after around 18k ono for it

pm me if needed

cheers kyle

4685148272_9d1065f58b.jpg

4684514483_4161094a8c.jpg

4685148338_74d2c89ec4.jpg

How many kms ?

ahh knew i forgot something. just done 114000. serviced every 4-5000 using royal purple oils :huh:

dont let the kms scare anyone after all it is a 99model. and for thos who think these fresh imports are genuine 30-40k are kidding themselves (majority of time).

  • Like 1
  • 3 months later...

UPDATE 15/02/2011

car needs to go cannot afford to be running 2 cars whilst looking for a house to buy, a wedding to pay for and a honey moon to pay for.

$17500

car now sits at 116900km. making 208kwaw :) very fun car to drive even funner when boost comes on, hits hard and holds til redline :)

recently installed some new goodies all these only around 500km old.

toyosports 3inch frontpipe

toyosports 3 inch cat back exhaust

tomioka 100cell highflow CAT

HKS RS induction pipe

HKS mushroom POD filter

MEEK battery relocation tray

Genuine Mitsu weathershields

brembo calipers refreshed

Drydon heatshield.

also have a heap of stock parts to go with car too, intake pipe,battery tray, cat, front pipe, headlights, intercooler pipe.

Clutch is beginning to slip now..still drivable just slipping upon full boost every now and then.

if i get the price i am after i will sell with a new clutch supplied with a new flywheel too.

or i can supply a clutch n u can fit it,

or i can sell cheaper as is and u can choose your own clutch to put in. upto the buyer

  • Like 1

lol yeah photoshop.

Its a carbon bonnet by the way lol

umm timing belt was done between 60 n 70km before i owned however i dont have a receipt for this, i just seen it on the computer at edward lees where i bought it from. they showed me all the maintenance that had been done.

  • Like 1

Has the timing belt been changed at 100k ?

Receipts for this ?

And the black bonnet, how can you see the engine through it ? Or is that you photoshopping it to look as though you can ?

AHAHAHAHAHAH :worship:

is this a noobs effort at criticsing and totally effing it up???

LOL

  • Nope 2

AHAHAHAHAHAH :worship:

is this a noobs effort at criticsing and totally effing it up???

LOL

Whats your problem ???? You, who've been a member here for 3 1/2 years less than I, are calling me a noob ???

You appear to be reading things into my questions which aren't there if you think I am in any way having a go at the seller or his great car.

All legitimate questions I've asked the seller as I'm interested in his car but as I'm in a different state to him I can't just drive over and see it in person ....

Edited by Simon_Koala
  • 3 weeks later...

BUMP

bout to spend $2000 on it.

New clutch going in on tuesday along with a new evo9 flywheel. undecided at this stage wether to get a Exedy HD organic or a jim berry special.

also rear diff and ayc serviced.

combine this with a brand new turbo back exhaust and a recently added intake kit what more can you ask for

someone grab this super quick, along with supreme handling car :) for an excellent price

$17500

couple new pics took yesterday for yous.

11032011068.jpg

11032011056.jpg

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...