Jump to content
SAU Community

Recommended Posts

hey guys selling up my beloved 6 to upgrade now to a 9 or 10 on lease

so no swaps at all unless u have a 9 or 10 and i can part trade and give cash. but thats all ony an evo 9 or 10

it is 1999 mitsubishi evo 6

white in colour

2.0l turbo

pod filter

turbo timer

mp3 cd player (have original double din cd/mini disc player that car came with)

drift 52mm digital boost gauge (intalled in single din above cd player)

carbon fibre bonnet with bonnet pins

cat back exhaust

Plazmaman specR hotside intercooler pipe with turbo outlet pipe.

walbro fuel pump upgrade

recaro interior in perfect condition no wear at all which is rare, just go and look at alot of other evo6 at the importers.

Greddy profec II boost controller running 17psi low 20high.

car puts out 186.9 kw at all wheels.

great fun car, plenty of power, superb handling.

plenty more in it, just add a short intake pipe and front pipe and should see over 200.

1piece headlight conversion. ( have stock headlights to go with car too)

brand new rear tyres, plenty tread fronts

brand new front rotors and pads

rego until August 2011.

i think that is all.

located in newcastle nsw

after around 18k ono for it

pm me if needed

cheers kyle

4685148272_9d1065f58b.jpg

4684514483_4161094a8c.jpg

4685148338_74d2c89ec4.jpg

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/342331-evo-6-mitsubishi/
Share on other sites

hey guys selling up my beloved 6 to upgrade now to a 9 or 10 on lease

so no swaps at all unless u have a 9 or 10 and i can part trade and give cash. but thats all ony an evo 9 or 10

it is 1999 mitsubishi evo 6

white in colour

2.0l turbo

pod filter

turbo timer

mp3 cd player (have original double din cd/mini disc player that car came with)

drift 52mm digital boost gauge (intalled in single din above cd player)

carbon fibre bonnet with bonnet pins

cat back exhaust

Plazmaman specR hotside intercooler pipe with turbo outlet pipe.

walbro fuel pump upgrade

recaro interior in perfect condition no wear at all which is rare, just go and look at alot of other evo6 at the importers.

Greddy profec II boost controller running 17psi low 20high.

car puts out 186.9 kw at all wheels.

great fun car, plenty of power, superb handling.

plenty more in it, just add a short intake pipe and front pipe and should see over 200.

1piece headlight conversion. ( have stock headlights to go with car too)

brand new rear tyres, plenty tread fronts

brand new front rotors and pads

rego until August 2011.

i think that is all.

located in newcastle nsw

after around 18k ono for it

pm me if needed

cheers kyle

4685148272_9d1065f58b.jpg

4684514483_4161094a8c.jpg

4685148338_74d2c89ec4.jpg

How many kms ?

ahh knew i forgot something. just done 114000. serviced every 4-5000 using royal purple oils :huh:

dont let the kms scare anyone after all it is a 99model. and for thos who think these fresh imports are genuine 30-40k are kidding themselves (majority of time).

  • Like 1
  • 3 months later...

UPDATE 15/02/2011

car needs to go cannot afford to be running 2 cars whilst looking for a house to buy, a wedding to pay for and a honey moon to pay for.

$17500

car now sits at 116900km. making 208kwaw :) very fun car to drive even funner when boost comes on, hits hard and holds til redline :)

recently installed some new goodies all these only around 500km old.

toyosports 3inch frontpipe

toyosports 3 inch cat back exhaust

tomioka 100cell highflow CAT

HKS RS induction pipe

HKS mushroom POD filter

MEEK battery relocation tray

Genuine Mitsu weathershields

brembo calipers refreshed

Drydon heatshield.

also have a heap of stock parts to go with car too, intake pipe,battery tray, cat, front pipe, headlights, intercooler pipe.

Clutch is beginning to slip now..still drivable just slipping upon full boost every now and then.

if i get the price i am after i will sell with a new clutch supplied with a new flywheel too.

or i can supply a clutch n u can fit it,

or i can sell cheaper as is and u can choose your own clutch to put in. upto the buyer

  • Like 1

lol yeah photoshop.

Its a carbon bonnet by the way lol

umm timing belt was done between 60 n 70km before i owned however i dont have a receipt for this, i just seen it on the computer at edward lees where i bought it from. they showed me all the maintenance that had been done.

  • Like 1

Has the timing belt been changed at 100k ?

Receipts for this ?

And the black bonnet, how can you see the engine through it ? Or is that you photoshopping it to look as though you can ?

AHAHAHAHAHAH :worship:

is this a noobs effort at criticsing and totally effing it up???

LOL

  • Nope 2

AHAHAHAHAHAH :worship:

is this a noobs effort at criticsing and totally effing it up???

LOL

Whats your problem ???? You, who've been a member here for 3 1/2 years less than I, are calling me a noob ???

You appear to be reading things into my questions which aren't there if you think I am in any way having a go at the seller or his great car.

All legitimate questions I've asked the seller as I'm interested in his car but as I'm in a different state to him I can't just drive over and see it in person ....

Edited by Simon_Koala
  • 3 weeks later...

BUMP

bout to spend $2000 on it.

New clutch going in on tuesday along with a new evo9 flywheel. undecided at this stage wether to get a Exedy HD organic or a jim berry special.

also rear diff and ayc serviced.

combine this with a brand new turbo back exhaust and a recently added intake kit what more can you ask for

someone grab this super quick, along with supreme handling car :) for an excellent price

$17500

couple new pics took yesterday for yous.

11032011068.jpg

11032011056.jpg

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...