Jump to content
SAU Community

(sa) Mitsubishi Mirage 2000 Manual, A/c, Cd Low Ks Very Clean, Reliable Daily...so Cheap To Own


Recommended Posts

7ab2febe.jpg

-2000 model

-146ish K's

-Dark Green

-Rare black/grey velour interior

-Air con

-5 Speed manual

-CD player with 4x splits in stock speaker locations

-14" Lancer stockies with FALKEN AZENIS ($$$$) front and Michelin rear tyres...all with great tread

This has been one of the most sensible cars I have ever owned. Bought it after a long search because I was quite fond of a friends Mirage years ago that I used to drive...Don't laugh, they have a really nice seating position, motor/gearbox/clutch are a pleasure to use and they handle very well, as well as having a good amout of interior space for a small car. It's stupidly cheap to run, register, service etc. I am the 3rd owner, the second of which had it for the majority of it's life and looked after and serviced it regularly. Apart from some slightly worn pads there is nothing really that needs any attention. Paint is good, interior is good, gets 100kms to less than 8 litres of regular unleaded.

Looking for $4000 or near offer...

Cheers,

Dre 0409 069 251

th_ee428b78.jpgth_7e78f398.jpgth_7ab2febe.jpgth_38052f43.jpgth_88a50644.jpg

  • 4 weeks later...

Just serviced, and have new rotors and pads for the front to go on before sale

Make some offers!

  • 2 weeks later...
  • 2 weeks later...

Well if you have luck moving this on my R34 GT-T sedan is for sale (my price is negotiable - currently asking $14,480 but would knock $1000 off for an interstate buyer - and I'd happily drive it to SA for you):

http://www.skylinesaustralia.com/forums/topic/339766-fs-pearl-white-1998-r34-skyline-25gt-t-sedan/

I'd love to take this off your hands but I already have 3 cars :(

Thanks but the R34 idea is a pipe dream for now as things have changed and I already bought another car, so cash sales (or swaps in my favour :whistling::P ) only

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...