Jump to content
SAU Community

Recommended Posts

Hi everyone!

I need injectors for my 1994 R32 GTR in the sunshine coast area and O ring rubber kit for all 6,

preferably not paying Nissan $435 EACH!!!!

Can anyone please advise me on where I can get any and how much?

Is it possible to have non genuine injectors at all?

the only part number that is on the injector itself is

A46-00

I just need standard new injectors, my car is completely stock, can anyone please offer some help.

Currently my car is garage bound, and creating a ton of petrol fumes...

Thanks in advance for any help, really appreciate it!

They're stockers, and leaking is common at this age. I have heard its possible to get them repaired, but I just ordered at set of seimens 550s from the states on ebay $550 for the set of 6, but you would need an ECU to do the same. Maybe ring around local fuel injection places and see if you can find someone who can repair them.

They're stockers, and leaking is common at this age. I have heard its possible to get them repaired, but I just ordered at set of seimens 550s from the states on ebay $550 for the set of 6, but you would need an ECU to do the same. Maybe ring around local fuel injection places and see if you can find someone who can repair them.

Would you know the OEM number for these particular injectors?

Are they just leaking out the o-rings? Have you had them checked by an injector place/tune shop to see if the injectors are actually stuffed? Very easy to have non standard injectors, but you do need tuning options if you go larger than stock. (you can get 700cc sards for 200 each brand new btw-so I wouldn't be looking at the nissan special price option.) If you want to replace with stockers then look around the sau parts recyclers (like nisswreck) or for sale forums and you might find some. Make sure they're cleaned and flow checked, also get new rubbers.

Are you looking to make more power in the future?

Heres a pic, I cant IM anyone as yet, sry.

post-78625-1290422081_thumb.jpg

not sure what colour tops they have, seems like mustard colour to me lol.

That's ok mate.

What is the VIN number of your car - to get the correct OEM # for the injectors.

Thanks for the reply's, they are cracked at the bottom, baker lights, i think, and one crumbled in my fingers, so i deff need new ones, they were also leaking out the o rings too tho.

I have now contacted everyone, only Repco gave me a reasonable price of $130 for 525cc each, but i would need to do stuff to the ecu im sure. I really really dont want to do that at all.

My intentions were to leave the car completely stock forever, as that's what makes it such a unique example, as its only done original 80,000km.

Repco said that they could 'try' and repair them for $278, But I doubt they would be successful, due to the age, and just deterioration

Thanks for all the advice! cheers,

We can help with a genuine Nissan o-ring & seal kit for $84.70 + $11.00 express postage, if you are interested simply follow the link below:

http://gtr.kudosmotorsports.com/Engine-Com...32-R34-RB26DETT

Nissan-RB26DETT-Fuel-Injector-O-Ring-Seal-Kit.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...