Jump to content
SAU Community

Recommended Posts

Please excuse my ignorance, but I just saw this article:

http://formen.ign.com/news/16796.html?fromint=1

And it mentions the motor:

The Skyline GTR’s race-tested RB36DETT DOHC, 24 valve 2.6 liter intercooled, twin-turbo I6 at a very conservative 280 base horsepower and a very respectable 289 lb/ft of torque.

This is a typo right? What is the biggest RB motor out there?

Link to comment
https://www.sau.com.au/forums/topic/34579-rb36dett/
Share on other sites

Please excuse my ignorance, but I just saw this article:

 

http://formen.ign.com/news/16796.html?fromint=1

 

And it mentions the motor:

 

 

This is a typo right? What is the biggest RB motor out there?

By the sounds of the article, they are refering to the RB26DETT so it looks like a typo. No such thing as an RB36DETT.

Link to comment
https://www.sau.com.au/forums/topic/34579-rb36dett/#findComment-691925
Share on other sites

While we're kind of on the topic, what's the biggest RB engine you could make? e.g. RB30 block, RB26 head etc - no idea what crank and other parts you'd need, but roughly how big could you make one. I realise it would totally change the nature of the engine if it was 3.5L or so, but I'm just kind of curious.

Link to comment
https://www.sau.com.au/forums/topic/34579-rb36dett/#findComment-691943
Share on other sites

We have tried up to 3.3 litres - we could have gone more, but it was diminishing returns, hence pointless.

Just for completeness, we also went as low as 2.4 litres...

Mario.

I suppose it does make sense that if you're increasing the stroke it wouldn't be as easy to rev as hard. Also, you aren't really increasing the volume of the engine that much % wise once you are adding only a few tenths of a litre.

How did the GTR respond to the reduced capacity? I think it was Nismo that reduced the capacity of a VH45DE to 3.5L and it revved like an F1 car. Your GTR already is a very revvy machine, so it must have been even better at 2.4L. If I remember correctly, you were having trouble shifting at very high revs at some point (my memory is bad, sorry). Did it make shifting harder?

Link to comment
https://www.sau.com.au/forums/topic/34579-rb36dett/#findComment-692028
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • The part where you claim the car "is done" means you won't...
    • Johnny is sad now... Because you didn't get Bosch Motorsport ABS.  
    • Hey keep the ideas coming, I'm always keen on projects! But, problem fixed!  I got a cheapie ozito scope from Bunnings and had a good look in and around the bearing and sensor hole. I couldn't see a smoking gun but the bearing looked a bit strange, especially when comparing with a new one. I thought the cover had come off the bearing magnets.  Sorry for pics of a screen, I didn't have an SD card.     Good thing I had the old one to inspect. So, given I'm like a pit crew with wheel bearings and luckily I had a spare bearing because I f**ked up my parts order, I decided to just smash it out. Got the old one out in about an hour. So much easier when the parts haven't had a chance to rust together yet. 😂 And, well, found the problem.    In the second pic at about the 8 o'clock position, you'll see what I think is the tip of the old sensor.  The new sensor has definitely been rubbing but it's all intact, just a little shiny so I'm hoping it's fine.  The car brakes perfectly now and no errors.  I think the job took about 2.5h in the end. 👍🏻 I really appreciate the help in here as usual. Thanks guys.
    • I was only looking because I saw some drops on the ground but it wasn't alot. Recently had it serviced will ask the mech to confirm. Find it strange that it looks standard though, can see in another photo of a random box 
×
×
  • Create New...