Jump to content
SAU Community

Recommended Posts

Up for sale is a white 1995 Honda Civic CXI ek1 hatchback manual. selling with no rego no rwc as is. $4,500

perfect for p platers or anyone looking for a cheap daily, or even a project car

kms - chassis : 220 xxx kms. engine: 120 xxx kms

I put a new d16y4 1.6L 4 cyl non vtec engine with approx 120 xxx kms in. i also got a brand new stage 4-6 ceramic xtreme competition clutch kit installed, with a new thrust bearing and pilot/ roller bearing for the flywheel. the stage 4 - 6 clutch its rated to handle up to 200 to 350% torque increase.

also had engine oil + oil filter, gearbox oil, air filter, spark plugs replaced, clutch system bled, cooling system flushed all at the same time the engine and clutch was changed.

brand new front driveshafts were replaced 4 months ago

the car is sitting on ek4 15" alloys with Toyo T1R's on the front and Kenda radials on the rears all have good tread

it drives well and will be a very reliable car, the only thing i know that it needs for rwc is a right hand side tie rod as it is a little wobbly and the wiper blade inserts changed. i cant afford to spend any more on the car so I'm selling the car as is.

i have only driven the car 30 kms up and down the street since the engine and clutch change as it is unregistered, so the clutch still hasn't had enough driving to bed in. i did all this intending on keeping the car but things changed and i bought a $900 silvia instead as i need to sell this car to pay of debts.

please no time wasters, tyre kickers and low ballers

i will post up pics soon and put all the numbers up so people and do vehicle status checks for piece of mind.

the car is located in south east victoria, springvale south, melbourne. contact number is 0431 041 005 Meng

inspections welcome, test drives welcome but at your own risk as the car is unregistered

thanks for looking at my ad

Edited by menglo
Link to comment
https://www.sau.com.au/forums/topic/346984-95-white-civic-ek1-hatch-fs/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...