Jump to content
SAU Community

Race Seats/16" & 17"jap Wheels/drift Carbon Wing

SKYNET
 Share

Recommended Posts

SKYNET Mentor

SKYNET

Posted
Posted

Moving after Xmas so I'm clearing out the shed

Can deliver around Brissy area or pickups from either Wooloongabba-Brisbane or Maroochydore-Sunshine Coast

Courier at your expense

Will only trade for roof racks [that go across stock rails] for my '99 Stagea :happy:

All rim's are 5 stud/114.3 PCD except the single Driftech which is multistud [4 or 5 stud]

-Pair of reclineable race seats VGC

Unknown brand-no rails but they have holes to attach them

Black & grey mesh material

Bolt holes 330mm & 270mm apart

$300 ono

-Carbon fibre drift style wing VGC

No damage-has some ery light scratches in top clear coat

Was fitted on r33 gtst Skyline but can be fitted on most cars

Includes all parts needed to fit it-1440mm wide 200mm high

$260 ono

-BLITZ atmo blowofff valve with RB25 adapter VGC

nice crisp sound-chrome paint

$180 ono

-Go Fast Bits [GFB] silver/chrome blow off valve with rb25 adapter plate

Works perfectly

Vents to atmosphere-can't be setup as plumb back

$160 ono

-ONE new gold Driftek rim 17x9 +30 PCD 114.3 [5 stud only-not multistud]

Has had tyre fitted & removed shortly after

No scratches/scuffs/gutter rash at all

$250 ono

-17x7 +35 silver 5 spoke wheels VGC

No damage or gutter rash-only a few light scuffs/scratches on paint

missing one centre cap-were fitted on a my '99 Stagea

two yokohama tyres are about 80% but camber worm

other random tyres arent roadworthy

all tyres are 225/50/17

$600 ono

-2xWORK "Equip" 16x8 +40 two piece alloy rims with skid tyres VGC

Very lightweight-perfect offset for r33 GTSt Skylines

$150

-4xStock r33/s14 16x6.5 wheels-tyres are all fkd-will sell pairs

$200 ono

-3xRandom 16x7 +40 alloy rims in good condition-good solid skid rims-look ok

can chuck in a steel rim that's same size

$80

-HKS pod filter with rb25 adapter [needs new filter]

$80 ono

-Stock VGC series 1 r33 spoiler-original burgandy paint

light works-light wiring is allgood

$80 ono

-RB25 stock 2.5" dump/frontpipe/cat converter [two of each-frontpipe should fit RB20's too]

$120 ono for all-will sell parts seperately

-r33 gtst HICAS module-no damage

$60 ono

-Stock '95 Nissan Stagea[skyline wagon] full exhaust-should fit r33/r34's

$80 ono

-Autoteknica 350mm black/light grey leather steering wheel VGC

In good condition-horn,etc included

35cm in diametre-centre of mounting holes are 70mm across & 35mm apart

$60 ono

post-59075-0-93842100-1292663189_thumb.jpg post-59075-0-05691500-1292663227_thumb.jpg post-59075-0-78466200-1292663242_thumb.jpg

post-59075-0-08534100-1292664037_thumb.jpg post-59075-0-31018000-1292664413_thumb.jpg

post-59075-0-33358100-1292664479_thumb.jpg post-59075-0-36645900-1292664553_thumb.jpg

post-59075-0-78746500-1292664642_thumb.jpg

post-59075-0-60753200-1292664731_thumb.jpg post-59075-0-92009400-1292664885_thumb.jpg post-59075-0-48650700-1292664899_thumb.jpg post-59075-0-00010600-1292664928_thumb.jpg

post-59075-0-33372900-1292664969_thumb.jpg post-59075-0-56371000-1292665049_thumb.jpg post-59075-0-31698800-1292665064_thumb.jpg

post-59075-0-46188100-1292665104_thumb.jpg post-59075-0-11374100-1292665126_thumb.jpg

FST513 Mentor

FST513

Posted
Posted (edited)

Would you take $160 and posted to sydney express as of tomorrow for the blitz BOV?

PM me if you want to talk further, i want it asap.

Edited by FST513

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Nice....looking forward to that update
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Neg, the top one is actually for the front. The sizes are 18x10.5 +18 and 18x11 +32.   I measured many times but I'm sure I'll have problems as this is the thread for problems.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Just one thing; tapping tapered threads is tricky. Taps are always tapered and you would generally run it as far as you can, but with a tapered thread you have to stop much sooner otherwise the wide part of the taper will run in too far and you will have to thread the sensor in too far too as well (possible that it will never make a good seal) BTW nice wide wheels, I guess the top one is for the back!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Welp, good to know. Will have to wait awhile until steady hands with drills and taps are available. In other news, these just arrived! I will weigh them for posterity. Edit: 11kg each (or 10.9/11.1 depending on what my scale decides over multiple tests, the 18x11 don't seem to weigh noticeably any more than 10.5)  
×
×
  • Create New...