Jump to content
SAU Community

Recommended Posts

  • Replies 65
  • Created
  • Last Reply

Top Posters In This Topic

From what I've read on ns.com, it's still going ahead. If it's pouring rain, then looks like it will be cancelled.

In saying that, I hope Jizzles will take the weather conditions down here into consideration, as it might be better than Sydney if it's raining up there.

Just a heads up for us South Cost peeps:

As Jizzles has mentioned already we'll meet at the bottom of Mount Ousley in the car park instead of North Gate Maccas, less popo and more parking availability.

Arrive at carpark: 1:15pm

Leave: 1:45pm sharp

For those not sure where it is exactly, here is a link on google maps:

http://maps.google.com.au/maps?f=d&source=s_d&saddr=Mount+Ousley+Rd&daddr=-34.4165413,150.8597161+to:-34.3942982,150.8461402+to:Picton+Rd&geocode=FRAS8_0dqUT-CA%3BFWPY8v0dxO_9CClHi6CMKRoTazEQbJflZ30BEw%3BFUYv8_0dvLr9CCkRf0PzxBsTazGg4Uifa30BEw%3BFQh-9P0ddBj8CA&hl=en&mra=dvme&mrcr=0&mrsp=1&sz=16&via=1,2&sll=-34.413725,150.865588&sspn=0.015649,0.033023&ie=UTF8&ll=-34.402732,150.881488&spn=0.015651,0.033023&t=h&z=16

This map also contains the route we should take if we're going up Mount Keira, which will be more fun than Mount Ousley imo.

For people more south who aren't that familiar with Wollongong area, take a few minutes to study the route in case you get stranded behind in traffic when we take off.

Of course we'll pull over a couple of times to allow people to catch up and assemble, so don't worry too much.

If people arent too keen on doing Mt. Keira, then we'll just go up Ousley instead.

Anyways, if South Coast people can reply here to confirm they've read this and attending, then we'll know what to expect for tomorrow then.

PS Jizzles: Maybe you can give me your number so I can tell you if weather permits down here in the morning.

Also what channel are you going to be on? In saying that, UHF Ch 4 is good for down here cause there's a repeater that covers Wollongong area, so its good for talking long distances on our little hand helds. Just keep in mind there will probably be alot of truckies and bogans talking on it lol

Edited by Owens

Good stuff oddsock :)

Humbla: If you look at point A on the google map link and zoom in all the way you will see the carpark. You wont miss it ;)

Or if you're going to north gate maccas, go up Mt Ousley road which is directly opposite and it will take you to the bottom of Mt Ousley where the carpark is.

Follow point A to B on google maps:

GOOGLE MAPS LINK

Edited by Owens

Lol yeah, we spent over an hour getting the cars positioned for photos, so I can understand why people are getting anxious to see some car pr0n.

Hopefully Jizzles will deliver soon :)

The cruise itself was pretty good. I didn't expect so many people at the Wollongong Pre meet. Made the Mt Keira route much more fun :)

Didn't really count how many there were, but you can count how many in the photos when they come out :P

Edited by Owens



  • Latest Posts

    • I have been wondering if this is as simple as a voltage issue with the battery. Even on a charger, I can’t seem to get it over 11.8V on the terminals.    Unless the alternator has failed as well, that wouldn’t cause it to die in the middle of driving though. 
    • I’ll give this a shot next time I’m able to wrench on it.    I was able to get my hands on a Haltech Nexus, so that should help with some of the more bizarre troubleshooting. Make sure the CAS is actually sending signal and will be able to set the proper dwell on the R35 coils.    I’ve checked power/grounds/signals at the CAS, ignitor, and plugs and it was all there. Granted this was static with ignition on, not cranking.    I also plan on swapping out the fuel filter and throwing on a fuel pressure gauge at the rail just to confirm I’m getting the correct pressure at the rail. 43psi if I recall correctly. 
    • The attached document is fine. I just downloaded & opened it.
    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
×
×
  • Create New...