Jump to content
SAU Community

Recommended Posts

Item Description: HKS Drag Coilovers

Location: Sydney NSW

Website: Here

Item Condition: Used, blown front left Shock, Front left camber top - 1/3 stud is mutilated.

Reason for selling: Upgraded

Price and price conditions: 100$ Come pick them up, too heavy to post.

Pictures:

5423119698_df5c40d2b6_z.jpg

5422515477_6b2461878b_z.jpg

5422515929_d849e6c1e6_z.jpg

Item Description: Nistune ECU for Rb20

Location: Sydney NSW

Website: Here

Item Condition: Used, 3 months old

Reason for selling: Spun a Bearing in the rb20, upgraded to rb25

Price and price conditions: 500$ ono

Pictures: The Nistune Board is inside the old rb20 ECU, with a Nistune sticker on it.

Item Description: Rb20 Full gasket set

Location: Sydney NSW

Website: Here

Item Condition: Unopened

Reason for selling: Got a Rb25 now

Price and price conditions: 150$

Pictures:

5422517669_46ab9fa158_z.jpg

5423122656_0e4e07f618_z.jpg

Item Description: Rb20det with Rb25 turbo.

Location: Sydney NSW

Website: Here

Item Condition: 190,XXX KM, Spun some kind of bearing, suit rebuilt or parts.

Reason for selling: Spun bearing, got a RB25 now

Price and price conditions: 300$

Pictures:

5422841323_304eb2503a_z.jpg

Phone: 0424505711

  • 2 weeks later...
  • 4 weeks later...
  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
×
×
  • Create New...