Jump to content
SAU Community

R33 Parts: Floor Mats, Rear Seats, Nitrous Purge Kit, Aerial, Window Regulator And Fibreglass Series 1 Front Grille


Recommended Posts

Hi guys,

Im selling my spare drivers window regulator and motor, so not the switch panel for the window the actual mechanism behind the door shell. $50 or best offer

post-59566-0-27371900-1297078436_thumb.jpg

I've just put a rollcage in my car so I'll be selling the rear floor mats and rear seats. Dont know how much these are worth to somebody so just make an offer.

Also for sale I have a ZEX Nitrous Show Purge Kit with dual outlets designed to vent from vented side guards or bonnet, unless you have other plans for it. Looking for around $300-350 cost $550 imported from USA.

post-59566-0-95414100-1297078599_thumb.jpg

Have a standard aerial for sale as well as mine was removed and welded up when the car was resprayed as I dont listen to the radio. $20

Series 1 Front Grille in fibreglass purchased from eBay unused as I decided to get a Carbon Fibre one instead $40. Purchased for $80

PM any offers and ill get back to you asap

Dan

I'll take the aerial if you can post to centralcoast 2259, mick 0403556883, or send me your number cheers..

Still for sale:

Rear Seats

Zex Nitrous Purge Kit

Series 1 Front Grill Fibreglass

Window motor/regulator

Other items possibly sold awaiting payment

Just found my old N1 Style Bonnet lip for Series 1 R33. Currently in white from previous bonnet before I changed to a carbon one.

Looking for around $50 but make an offer if interested.

The nitrous purge kit can be used even as a normal Nitrous kit for drags right? Sorry im a noob in this

You would be able to use the setup for it, however you'd need to get the injection solenoid as this one has a purge solenoid. From when I was looking around the injection solenoid was about $80-100 i think.

Fibreglass Front Grill

post-59566-0-82056200-1297387476_thumb.jpg

post-59566-0-36375500-1297387703_thumb.jpg

Floor Mat

post-59566-0-60421000-1297387587_thumb.jpg

Aerial

post-59566-0-76699900-1297387567_thumb.jpg

Rear Seats - No rips or tears, no ones hardly sat in the back hence why I put in a rollcage.

post-59566-0-10781600-1297387761_thumb.jpg

post-59566-0-86383800-1297387809_thumb.jpg

Rear floor mats still available without the centre one as that ones been sold. From Series 1 good condition almost brand new looking as very rarely have had passengers in the rear seats. $20 for both genuine

Dan can you txt me your full name so i can do direct pay into ur acc on internet,for aerial...... cheers mick.....0403 556 883...

Aerial SOLD

Centre Rear Floor Mat SOLD

Window Regulator *Awaiting payment*

Still available:

Series 1 Front Grill unpainted

Rear Floor Mats - minus centre one (good condition as rarely had passengers in rear seats)

Rear Seats (good condition as rarely had passengers in rear seats)

Nitrous Kit (have got a potential buyer so you may need to be quick if interested) All still brand new in sealed packaging since I bought it

N1 Style Bonnet Lip currently in white

Floor mat posted, still awaiting payent for window regulator...

All other items still available, PM offers will reply asap

I'm replacing my mirrors with GT Mirrors hopefully this weekend, so if your interested in those they will also be for sale. PM offers if interested

Above items still for sale, also a mates set of Lenso GF7 black with polished lip. $600 on offer with tyres. Size is 18x7.5 with both 4x100 and 4x114.3

Also if needed have original spare slimline wheel if anyones looking.

Parts:

R33 Series 1 Front Grille Fibreglass (Unpainted)

R33 Series 1 Rear Seats

R33 Series 1 Rear Floor mats minus the middle piece

Zex Nitrous Purge Kit with 10lb bottle (empty) Brand New still sealed in box from USA

Lenso GF7 Black with polished lip with 4x100 or 4x114.3 multi stud fit $600 with current tyres

R33 Series 1 mirrors (Waiting until they have been changed for my new GT mirrors)

Spare slimline wheel

N1 Style Bonnet Lip (White)

Aerial SOLD pending payment on saturday

Window Regulator SOLD payment received

Rear Floor mat middle section SOLD payment received

Most parts still available guys, surprised no ones putting on a bodykit on and needing the front grille though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...